Samsung Galaxy Fold Basic Manual page 26

• Do not subject to strong impact, such as dropping, stomping and throwing. Doing so may result in a malfunction.
• Do not put the product directly on sand at a beach, etc. Sand or other small particles might get inside the receiver/
speaker, the mouthpiece/microphone (upper/lower), the speaker, etc., causing the volume to drop. If sand gets inside the
product's main unit, it might cause fault.
• When using the Wireless PowerShare function to charge another device, do not stick metallic items (such as stickers that
contain metal) on the back of the product or another device. Doing so may result in a malfunction.
• When using the Wireless PowerShare function to charge another device, if the temperature exceeds a certain level,
charging may stop or charging time may long, but it is not abnormal. Please wait for the temperature to decrease and
charge another device again.
• When using the Wireless PowerShare function to charge another device, place the product and another device on a flat,
stable surface and charge the product.
• Turn off the vibration function of the product when using the Wireless PowerShare function to charge another device. If
the product vibrates, it may not fully charge or fall.
• When using the Wireless PowerShare function to charge another device, remove any commercially-available cases,
covers, plastic film, stickers, and so on attached to the product or another device before charging.
• When using the Wireless PowerShare function to charge another device, check that the product and another device are
not wet.
• If you run an application on the product when using the Wireless PowerShare function to charge another device, it may
not fully charge.
• Reception quality may decrease while using the Wireless PowerShare function to charge another device.
• Do not move the product and another device, while using the Wireless PowerShare function to charge another device.
• Do not put credit cards, nor contactless IC cards, etc. between the product and another device when using the Wireless
PowerShare function to charge another device. Another device will not be able to be charged, and will heat up while
charging, and the product and the cards might malfunction, or be damaged.
■ Touch Panel
• Do not put stickers or sheets (e.g. commercially available protective films, peep prevention sheets) on the main display.
• Do not press on the display with pointed objects such as pen points or fingernails, etc. Do not apply excessive pressure.
• Do not press hard on the display, but lightly tap it.
• When carrying the product in your pocket or bag, take care not to put the touch panel close to metals or other conductive
materials, as it might cause false operation of the touch panel.
■ Organic EL (OLED) display
• Although lightning intensity of OLED can be decreased partly and displayed color can be changed when the same image
has been displayed for a long time, the brightness set to bright more than necessary or using extremely for a long time. It
is not abnormal because that is the characteristic of OLED.
• Although the OLED used on the product is made using high-precision technology, some pixels (dots) might be lit or out
at all times. Or color may be changed or unevenness of brightness may be shown if looked at from different angles. Note
that that is because of the structure of OLED, not a fault.
• Leaving the OLED exposed to the direct sunlight might cause a fault. Take care when you place the product by the
window or outside.
24
Notes on Usage