Better Homes and Gardens BH44-084-399-04 Assembly Manual page 5

1-1/4" Wood Screw
(5 used in this step)
5. Flip last assembly upside down and attach the Seat Frame (C) to the bottom of one Seat Board (D) by
using five 1-1/4" Wood Screws (8) through the countersunk holes on the Seat Frame and screw in place.
As shown above. Make sure that the Seat Board (D) is centered properly. Tighten the screws with a
Phillips screwdriver.
NOTE: Place a protective cover (like the bubble wrap packing material) over the carton or other support
surface to prevent from scratching.
Assembly Instructions
8
C
D
⑧
C
D
5
A