Table of Contents
Advertisement
5.1.3 TRIP COUNT UP or TRIP COUNT DOWN
The user can select TRIP COUNT UP or TRIP
COUNT DOWN in the setting mode.
After selects the function, it (TRIP UP / TRIP
DOWN) will display.
• Under TRIP COUNT UP or TRIP COUNT DOWN,
press C key or H key to switch.
Note: The range of distance ( 0~999.99 KM/H and 0~624.99 M/H)
5.1.4 CLOCK
Under SET CLOCK
• Press H key or C key to adjust number (12H, 24H, hour,
minute, second).
• Press M to go to the next setting.
9
• Under TRIP COUNT DOWN,
press M key to set up
distance for TRIP COUNT
DOWN.
• Press H or C key to adjust
number.
• Press M to go to the next
setting.
5.1.5 BIKE 1 or BIKE 2
5.1.6 WHEEL SIZE
To get the accurate result from the device for speed
value or other information, the wheel size must be
correct. Mark the symbol on the tire and ride one
circle. Then measure the length between two points
that result comes out. Or determine the wheel
circumference by the following equation:
Circumference (mm) = 2x3.14xR (inch) x2.54 (1 inch = 2.54 cm)
R=Radius in centimeter
Please also refer the "wheel size chart" on the last page to find out the wheel
size.
Under WHEEL SIZE
• Press H key or C key to adjust number
• Press M to go to the next setting.
Bicycle Computer
CY-528H has two bike settings, it allows
the user to set two different bike wheel
sizes.
Under BIKE 1 or BIKE 2
• Press H key or C key to adjust number
• Press M to go to the next setting.
10
Advertisement
Table of Contents
