Bicycle Computer
5.10 SCAN MODE
Under the SCAN MODE, the display will automatically show all modes in
circulating loop every 4 seconds, once the speed has been detected. Press any
key to stop SCAN feature.
5.11 DEFAULT SETTINGS
The Default Settings will clear all the measured value except ID CODES. Under
any "Setting modes" (Clock setting, Odo setting or Calorie setting), press and
hold all "MODE" & "SET" keys at the same time for 6 sec until all the values
return to default values.
The default setting will keep the ID Code after all the default values.
6 Seconds
14