Temporarily Changing The Receiver Volume During A Call - Funkwerk f.airnet FC11 User Manual

Basic rules for operation
Enter the current PIN and confirm the entry with the
handset is unlocked once more.

Temporarily changing the receiver volume during a call

The normal setting of the receiver volume takes place under Menu > Settings
> Device settings > Audio settings > Receiver volume.
If necessary, you can change this setting temporarily during a telephone call:
You are calling without the hands-free function being activated.
Temporarily increasing the volume
ñ
Ê
ï ð
ò
To call up the function: Give one short keystroke on the right or left) arrow of
the rocker
SWITCH
Then ...
ñ
Ê
ï ð
ò
To increase the volume: Press multiple times briefly on the right arrow of the
. The volume is increased by one level for each keystroke. Re-
ROCKER SWITCH
peat the brief keystrokes, until the desired volume has been reached.
Temporarily reducing the volume
ñ
Ê
ï ð
ò
To call up the function: Give one short keystroke on the (right or) left arrow of
the rocker
SWITCH
Then ...
ñ
Ê
ï ð
ò
To reduce the volume: Press multiple times briefly on the left arrow of the
40
. The notification «Receiver volume» appears in the header.
. The notification «Receiver volume» appears in the header.
D11 / FC11
[OK]. The
RIGHT SOFTKEY