Advertisement
12 If your artwork is not the size of the print you require make sure
the Fit option in Page Size & Handling is highlighted. This will
scale your artwork to the size you selected in the print properties.
The Actual size option will print the exact same size of your
created document.
13 If required change the print quantity in the copies box.
14 Select Print to send your job to the Oce Colorwave printer. Visit
the printer in the room adjacent to UCLan Print to collect your
prints.
Please note:
• You do not need to use the touch panel on the printer.
• The Printer touch panel will state it is 'locked'- this is normal.
• Wait until the printer fully releases the print before removal.
15 Cut off any excess white areas using the guillotine. Please
guillotine 1 sheet at a time only. You will potentially damage the
guillotine and your artwork if you exceed this amount.
Advertisement
