Inserting Batteries - LaserLiner ActivePen Manual

Hide thumbs Also See for ActivePen:

Table of Contents

Available languages

Safety instructions

Dealing with electromagnetic radiation

• The measuring device complies with electromagnetic compatibility

regulations and limit values in accordance with EMC-Directive

2014/30/EU.

• Local operating restrictions – for example, in hospitals, aircraft,

petrol stations or in the vicinity of people with pacemakers –

may apply. Electronic devices can potentially cause hazards or

interference or be subject to hazards or interference.

Symbols

Warning about hazardous electrical voltage:

Unprotected live components inside the device

housing are capable of posing a risk of electric

shock.

Protection class II: The test device has reinforced

or double insulation.

Overvoltage category III: Equipment in fixed

installations and for applications where specific

requirements with regard to the reliability and

availability of equipment have to be met, e.g.

circuit-breakers in fixed installations and devices

used in industrial applications which are

permanently connected to the fixed installation.

1 Detector tip

Inserting batteries

Open the battery compartment and insert batteries according

to the symbols. Be sure to pay attention to polarity

Before using the device, you should always test it on a main

circuit you know to be operational within the specified voltage

range.

2 Pocket clip

AAA

ActivePen

3 Battery

compartment

AAA

Table of Contents