Safety Instructions; Warning; Standard & Regulations - VWR Standard 1000 Instruction Manual

s I
afEty NstrUCtIoNs
Please read the entire instruction manual before operating the Orbital Shaker.
WarNINg! do Not use the Orbital Shaker in a hazardous atmosphere or
with hazardous materials for which the unit was not designed. Also, the user
should be aware that the protection provided by the equipment may be
impaired if used with accessories not provided or recommended by the man-
ufacturer, or used in a manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and maximum
safety.
do Not lift the unit by the tray.
CaUtIoN! To avoid electrical shock, completely cut off power to the unit by
disconnecting the power cord from the unit or unplug from the wall outlet.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly. do Not immerse the unit for cleaning.
do Not operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
Pinch Point - Keep fingers clear during operation.
3
s & r
taNdards EgUlatIoNs
VWR international hereby declares under its sole responsibility that the products com-
ply with the requirements of the following directives and associated standards:
associated EU directives:
EMC directive 2004/108/EC
LVD directive 2006/95/EC
ROHS directive 2002/95/EC
WEEE directive 2002/96/EC
safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part I:
General Requirements. IEC
IEC 61010-2-051
CSA/CAN C22.2 No. 61010-2-051-04
CSA/CAN C22.2 No. 61010-1-04
UL 61010-1
EMC standards:
CISPR 11 IEC 61000-4-3
IEC 61326 IEC 61000-4-4
IEC 6100-3-2 IEC 61000-4-5
IEC 6100-3-3 IEC 61000-4-6
IEC 61000-4-2 IEC 61000-4-11
EN