& S AINTENANCE ERVICING Your Orbital Shaker is built for long, trouble-free, dependable service. No lubrication or other technical user-maintenance is required. However, at least every three months you should: • UNPLUG THE UNIT • Remove any accumulated dirt from the base and platform •...
Page 5
OS-500 Orbital Shaker Flask Clamp Accessories Weight Capacity: approx. 35 lbs (16kg) at 75 rpm approx. 5 lbs (2.3kg) at 500 rpm Orbit: .75" (1.9cm) Large Platform Accessory Speed Range: 25 to 500 rpm Operating Temp: 4 C to 40...
NTRODUCTION The 120v and 230v units are supplied with a 3-prong power cord that should be plugged into a standard 3-prong grounded outlet. If the cord supplied does not meet your needs, please use an approved power cord that suits local codes and electrical supply. PERATING NSTRUCTIONS 1.
Page 7
DS-500 Digital Orbital Shaker Weight Capacity: approx. 35 lbs. (16kg) at 75 rpm approx. 5 lbs. (2.3kg) at 500 rpm Orbit: .75" (1.9cm) Universal Platform Accessory Speed Range: 25 to 500 rpm (Glassware purchased separately) Operating Temp: 4 C to 40 Voltage: 120 volts AC, 50/60 hertz 230 volts AC, 50/60 hertz...
Page 8
NTRODUCTION The 120v and 230v units are supplied with a 3-prong power cord that should be plugged into a standard 3-prong grounded outlet. If the cord supplied does not meet your needs, please use an approved power cord that suits local codes and electrical supply. PERATING NSTRUCTION 1.
Page 9
DS-500E Heavy-Duty Orbital Shaker Weight Capacity: Approx. 50 lbs (22kg) at 200 rpm Approx. 10 lbs (4.5kg) at 500 rpm Orbit: .75" (1.9cm) Speed Range: 25 to 500 rpm Operating Temp: 4 C to 40 Voltage: 120 volts AC, 50/60 hertz 230 volts AC, 50/60 hertz Current: Less than 1 amp...
Page 10
The orbital shaker is equipped with an RS232 serial interface, which is used to monitor and/or control the shaker. Please contact your VWR International representative for more information. PERATING NSTRUCTIONS 1.
Page 11
Weight Capacity: DS2-500-1 DS2-500-1: 110 lbs (49kg) at 25 rpm DS2-500-2 40 lbs (18kg) at 400 rpm DS2-500-2: Large Heavy-Duty Digital Orbital Shaker 110 lbs (49kg) at 25 rpm shown as purchased 40 lbs (18kg) at 200 rpm Orbit: DS2-500-1: 1" (25.4mm) DS2-500-2: 2"...
Page 12
The orbital shaker is equipped with an RS232 serial interface, which is used to monitor and/or control the shaker. Please contact your VWR International representative for more information. PERATING NSTRUCTIONS 1.
Page 13
DS2-500E-1 Weight capacity: DS2-500E-2 DS2-500E-1: 160 lbs (72kg) at 25 rpm 60 lbs ( 27kg) at 250 rpm Large High Performance Digital DS2-500E-2: 160 lbs (29kg) at 25 rpm shown as purchased 60 lbs (27kg) at 175 rpm Orbital Shaker Orbit: DS2-500E-1: 1"...
Page 14
The orbital shaker is equipped with an RS232 serial interface, which is used to monitor and/or control the shaker. Please contact your VWR International representative for more information. PERATING NSTRUCTIONS 1.
Page 15
UNIT, stop immediately and check mounting screw tightness. Platform Usage Chart Installation for Small and Large Platforms OS-500 DS-500 DS-500E DS2-500 DS2-500E The black pad does not have to be removed. Loosen the four knobs on Standard Platform the shaker approximately 1/4". Place platform on shaker by aligning (13"...
1 - Platform Package Contents: 1 - Test Tube rack Knob Installation for OS-500,DS-500,DS-500E 2 - Mounting knobs 2 - Washers Loosen the four knobs on the shaker approximately 1/4". Place plat- form on shaker by aligning the slots on the bottom of the platform Installation: to slide over the knobs on the shaker.
Page 17
LASK LAMPS Description Description 10ml 1 liter 25ml 2 liter 50ml 2.8 liter 125ml 4 liter 250ml 6 liter Capacity Chart 500ml (13 "x 13") (18" x 18") (24" x 24") (24" x 36") EDIA OTTLE LAMPS 33cm x 34cm 45cm x 45cm 61cm x 61cm 61cm x 91cm Description...
Need help?
Do you have a question about the OS-500 and is the answer not in the manual?
Questions and answers