Connector Pin Assignments (Continued 1) - JCM GLOBAL iVIZION Series Operation And Maintenance Manual

Section 2
C P A
ONNECTOR IN SSIGNMENTS
Table 2-7 lists the iVIZION SS/LD Photo-Coupler Connector Pin Assignments.
Table 2-7 iVIZION SS/LD Photo-Coupler Connector Pin Assignments
Pin No. Signal Name
1 24V DC (POWER)
2 M-RESET
3 USB-
4 USB+
5 USB GND
6 TTL-TXD
7 TTL-RXD
8 LED POWER
9 24V DC (POWER)
10 RS232 GND
11 TXD
12 I/F +12V DC
13 Vbus
14 JP+
15 TTL-G
16 LED-
17 ccTalk (P)
18 POWER GND
19 I/F GND
20 RXD
21 DET-GND
22 DET
23 JP-
24 SU SELECT
25 ccTalk (S)
26 POWER GND
*. I/O (Input/Output) Terminal as viewed from outside the Banknote Acceptor.
†. SG = Signal Ground.
‡. No Connection = SS Version, Connected to any SG = SU Version.
P/N 960-100929R_Rev. 3 {EDP #148849}
iVIZION® Series Next-Generation Banknote Acceptor Unit
(C
ONTINUED
Back Side View
Socket Housing (Transport Unit Side): DR1B026JA1 (JCM)
Pin Housing (Frame Side): DR1R026PA1 (JCM)
Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 & 26)
Recommended Wire: UL1061 AWG#26
Contact Type (Frame Side): D02-22-22P-10000 (JAE) (Pole# 1, 9, 18 & 26)
Recommended Wire: UL1061 AWG#24
* †
I/O
POWER +24V DC Power
IN Banknote Acceptor Master Reset Input Signal Line
IN/OUT -
IN/OUT -
SG -
OUT -
IN -
OUT LED Drive Line (anode)
POWER +24V DC Power
SG -
OUT Sereal Communication Output Signal Line
IN Interface Power Supply (+12VDC)
IN -
IN/OUT -
SG -
IN LED Drive Line (cathode)
IN/OUT -
POWER Power Ground (0V DC)
SG Photo-Coupler Communication GND
IN Serial Communication Input Signal Line
IN Connect to DET (Pin-22)
OUT Connect to DET GND (Pin-21)
IN/OUT -
IN
SS/SU Selection
IN/OUT -
POWER Power Ground (0V DC)
1)
Function
‡
© 2012, Japan CashMachine Co., Limited
2 - 4
Installation