JCM GLOBAL iVIZION Series Operation And Maintenance Manual page 122

Appendix B
10 FFC – an acronym for Flat Flexible Cable. This type of Cable contains printed circuit traces 
in it, and is generally used to interconnect and distribute signal information between 
various Printed Circuit Boards... See Page 4-3, 4-7 & 4-8
11 FG PLT – an acronym for Frame Grounding PLaTe... See Page 2-1
12 FPC – an acronym for Flexible Printed Circuit. This type of Circuit Card/Cable contains 
printed circuit traces on each side of it, and is generally used to interconnect and 
distribute signal information between two closely placed Printed Circuit Boards
... See Page 4-4
13 ID Sticker – another name for the Product Identification Label located on the right side of 
the iVIZION
14 JCM USB Tool Suite Standard Edition – a PC Application Program that includes Sub-
routine Programs for Downloading a File, Calibrating Sensors, examining Performance 
Metrics, testing Acceptor Functions, Enabling & Disabling the ICB Feature and viewing 
an image of the last Banknote accepted... See Page 6-1
15 JPL – an acronym for JCM Private Line to identify the Connector for activating an attached 
Sentry-2 Bezel Option... See Page 1-4
16 LD – an acronym for "Less Down" or No Stacker present... See Page 1-2
17 LED – an acronym for Light Emitting Diode. An LED is Semiconductor Device which turned 
on, emits a signal output in the visible light range. Available in a variety of colors, 
LEDs are cost effective and are commonly used as Indicator Lights in a variety of 
equipment devices. LEDs are also available in the invisible light range (i.e., 
ultraviolet, near-infrared etc.) making then useful as operational indicators for a variety 
of electronic equipment and applications, such as Banknote Validation Circuit in the 
iVIZION
18 Photo-Coupler – a method of increasing safety to both the equipment and personnel by 
19 Pictograph – small internationally recognized safety and attention symbols placed to the 
left Notes, Cautions and Warnings throughout a JCM Maintenance Manual
... See Page 1-1
20 Reference Paper – specially coated/colored paper strips which are inserted into a Banknote 
P/N 960-100929R_Rev. 3 {EDP #148849}
KF srl | www.keyfuture.com | Phone +39 059313920
iVIZION® Series Next-Generation Banknote Acceptor Unit
®
Cabinet Frame... See Page 6-7
®
Unit... See Page 1-5
isolating and routing transmitted data signals via using a Light Emitting 
Diode (LED) and Photosensitive Transistor combination circuit in various 
electronic equipment... See Page 2-4
Validator when performing
is used to help set minimum and maximum threshold detection levels 
when adjusting the photo-optical Sensors in the unit for optimum 
KF srl | www.keyfuture.com | Phone +39 059313920
F
I
J
L
P
R
Unit Calibration. Reference Paper 
®
iVIZION
© 2012, Japan CashMachine Co., Limited
B - 2
F