JCM GLOBAL iVIZION Series Operation And Maintenance Manual

JCM GLOBAL iVIZION Series Operation And Maintenance Manual

Next-generation banknote acceptor unit
Table of Contents

Advertisement

Support: http://www.jcmglobal.com/en/contact/default.aspx
Web-Site: http://www.jcmglobal.com
®
iVIZION
Series
Next-Generation Banknote
Acceptor Unit
Operation and Maintenance
Manual
(Revision 3)
P/N 960-100929R_Rev. 3 {EDP #148849}
Issue #4074-SME-01-03
© 2012, Japan CashMachine Co., Limited

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iVIZION Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for JCM GLOBAL iVIZION Series

  • Page 1 Support: http://www.jcmglobal.com/en/contact/default.aspx Web-Site: http://www.jcmglobal.com ® iVIZION Series Next-Generation Banknote Acceptor Unit  Operation and Maintenance Manual (Revision 3) P/N 960-100929R_Rev. 3 {EDP #148849} Issue #4074-SME-01-03 © 2012, Japan CashMachine Co., Limited...
  • Page 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Operation and Maintenance Manual Issue #4074-SME-01-03 REVISION HISTORY Rev №. Date Reason for Update Comment 1-06-11 Initial Version Engineering  3-1-11 Section 7 Parts List Number Changes incorporated. dictated changes Engineering  Additional Section 7 Parts List Number Changes incorp- 7-11-11 orated and LD Version information added.
  • Page 3: Table Of Contents

    iVIZION® Series Next-Generation Banknote Acceptor Unit Table of Contents Page 1 GENERAL INFORMATION.................. 1-1 Description........................1-1 iVIZION Units......................... 1-1 Model Number Specifications ..................1-2 Type Descriptions ......................1-2 Software Descriptions....................1-2 Precautions........................1-2 User Cautions........................ 1-2 Installation Cautions ........................1-2 Mounting, Dismounting & Transportation ..................1-3 Preventive Maintenance......................1-3 Banknote Fitness Requirements ....................1-3 Reference Paper Use Precautions....................1-3...
  • Page 4 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Table of Contents Page Cable Interconnection ....................2-2 DIP Switch Configurations..................... 2-2 Primary LED Indications ......................2-2 Connector Pin Assignments ..................2-3 Connector Pin Assignments (Continued 1)................2-4 Connector Pin Assignments (Continued 2)................2-5 Connector Pin Assignments (Continued 3)................2-6 Connector Pin Assignments (Continued 4)................
  • Page 5 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Table of Contents Page Sensor Transfer Board/CIS FFC/Transmissive Light FFC & Upper UV FPC Sensor Removals........................4-6 Validation Sensor Board Assembly Removal ..............4-7 Validation Sensor FPC Cable Removals ............... 4-8 CIS/Transmissive Light & Upper UV Sensor Removals ..........4-8 CIS/CIS FPC/Lower UV Sensor &...
  • Page 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Table of Contents Page ICB Function Operational Condition ..................6-19 7 EXPLODED VIEWS & PARTS LISTS..............7-1 iVIZION Entire Unit Exploded View ................7-1 iVIZION Entire Unit Parts List ....................7-2 iVIZION Validation Unit 1 Exploded View ..............7-3 iVIZION Validation Unit 1 Parts List ..................
  • Page 7 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures Page Figure 1-1 iVIZION Units ..................1-1 Figure 1-2 Precautionary Symbols ................1-2 Figure 1-3 Unacceptable Banknotes ............... 1-3 Figure 1-4 KS-072 Reference Paper Handling Precautions........1-3 Figure 1-5 iVIZION Component Names ..............1-4 Figure 1-6 iVIZION Banknote Acceptor SS Version Unit Outside Dimensions ..
  • Page 8 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures Page Figure 4-6 Right Frame Outer “R” Removal............. 4-2 Figure 4-7 Left Frame Outer “L” Removal..............4-2 Figure 4-8 Timing Belt Removal ................4-3 Figure 4-9 TR Bottom Cover Removal..............4-3 Figure 4-10 TR Side Cover “A”...
  • Page 9 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures Page Figure 6-9 Hardware Update Wizard Screen 1 ............6-2 Figure 6-10 Hardware Update Wizard Screen 2 ............6-3 Figure 6-11 Hardware Update Wizard Screen 3 ............6-3 Figure 6-12 Hardware Update Wizard Screen 4 ............6-3 Figure 6-13 Normal Mode Selection ................6-3 Figure 6-14 Test Mode Selection ................6-3 Figure 6-15 Required Software Download Tools ............6-3...
  • Page 10 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures Page Figure 6-53 Calibration Value Writing Screen ............6-10 Figure 6-54 Adjustment Info Screen 8 ..............6-10 Figure 6-55 PC Performance Test Tools Required ..........6-11 Figure 6-56 DIP Switch #8 Set ON ................6-11 Figure 6-57 JCM Tool Suite Standard Edition Screen..........
  • Page 11 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures Page Figure 7-14 iVIZION Cash Box Unit 3 Exploded View..........7-27 Figure 7-15 iVIZION LD Version Frame Exploded View.......... 7-29 Figure 7-16 iVIZION Optional Components Exploded Views ........7-31 Figure A-1 Additional Maintenance Equipment Requirements.........A-6 P/N 960-100929R_Rev.
  • Page 12 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Figures THIS PAGE INTENTIONALLY LEFT BLANK P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited...
  • Page 13 iVIZION® Series Next-Generation Banknote Acceptor Unit List of Tables Page Table 1-1 iVIZION Model Number Specifications ..........1-2 Table 1-2 iVIZION Type Number Specifications ............ 1-2 Table 1-3 iVIZION Software Number Specifications ..........1-2 Table 1-4 iVIZION SS Version Technical Specification ......... 1-5 Table 1-5 iVIZION SS Version Environmental Specification ........
  • Page 14 iVIZION® SeriesNext-Generation Banknote Acceptor Unit List of Tables Page Table 7-6 iVIZION Transport Unit 2 Parts List ............. 7-12 Table 7-7 iVIZION Transport Unit 3 Parts List ............. 7-14 Table 7-8 iVIZION Transport Unit 4 Parts List ............. 7-16 Table 7-9 iVIZION Transport Unit 5 Parts List .............
  • Page 15: General Information

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 1 1 GENERAL INFORMATION Description This section provides a general overview of the  • Unit Dimensions • ® iVIZION Next-Generation Banknote Acceptor International Compliance • Technical Contact Information. Series pictured in Figure 1-1.
  • Page 16: Model Number Specifications

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information Model Number Specifications Software Descriptions ® ® Table 1-1 lists the iVIZION Model Number Table 1-3 lists the iVIZION Software Number Descriptions. Descriptions. Table 1-1 iVIZION Model Number Specifications Table 1-3 iVIZION Software Number Specifications Model: iVIZION - * * * - SS Software: iVIZION-100-SS * * * - * * * - V *.* * (1)(2)(3)
  • Page 17: Mounting, Dismounting & Transportation

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 & T OUNTING ISMOUNTING RANSPORTATION ANKNOTE ITNESS EQUIREMENTS 1. Be sure to turn the Power OFF before mounting The following Banknote types may not validate or removing the Unit from its permanent loca- correctly, or can cause a Banknote jam and/or dam- tion.
  • Page 18: Primary Features

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information Primary Features • RFID Intelligent Cash Box with lockable Frame Unit, and a single handle for one-hand action ® Series of Banknote Acceptor  The iVIZION removal without having to use a Button or Lever to release the Cash Box.
  • Page 19: Specification (Ivizion Ss Version)

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 Specification (iVIZION SS Version) ECHNICAL PECIFICATIONS Table 1-4 iVIZION SS Version Technical Specification 98% or greater Note: The following Banknote types are excluded: a) Banknotes with unclear graphics b) Double (dual) notes Acceptance Rate c) Worn, dirty, wet, stained, torn or excessively wrinkled Banknotes d) Banknotes having folded corners or edges...
  • Page 20: Electrical Specifications

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information LECTRICAL PECIFICATIONS Table 1-6 iVIZION SS Version Electrical Specifications 12V DC (-5%) to 24V DC (+10%) [NOTE: Use a Current Source Limiting Supply Voltage: Power Supply] Standby: 24V DC = 0.2A, 12V DC = 0.2A Current Consumption: Operation: 24V DC = 1.3A, 12V DC = 2.3A Maximum: 24V DC = 3.2A, 12V DC = 3.0A...
  • Page 21: Specification (Ivizion Ld Version)

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 Specification (iVIZION LD Version) ECHNICAL PECIFICATIONS Table 1-8 iVIZION LD Version Technical Specification 98% or greater Note: The following Banknote types are excluded: a) Banknotes with unclear graphics b) Double (dual) notes Acceptance Rate c) Worn, dirty, wet, stained, torn or excessively wrinkled Banknotes d) Banknotes having folded corners or edges...
  • Page 22: Electrical Specifications

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information LECTRICAL PECIFICATIONS Table 1-10 iVIZION LD Version Electrical Specifications 12V DC (-5%) to 24V DC (+10%) [NOTE: Use a Current Source Limiting Supply Voltage: Power Supply] Standby: 24V DC = 0.2A, 12V DC = 0.2A Current Consumption: Operation: 24V DC = 1.3A, 12V DC = 2.3A Maximum: 24V DC = 3.2A, 12V DC = 3.0A...
  • Page 23: Ivizion Entire Unit Outside Dimensions

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 iVIZION Entire Unit Outside Dimensions Figure 1-6 illustrates the iVIZION SS Version entire Unit outside dimensions. NOTE: All Dimension are in Millimeters Figure 1-6 iVIZION Banknote Acceptor SS Version Unit Outside Dimensions P/N 960-100929R_Rev.
  • Page 24: Ivizion Ss Version Installation/Maintenance Space Requirements

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information iVIZION SS Version Installation/Maintenance Space Requirements ® Figure 1-7 illustrates the iVIZION SS Version installation and maintenance and space requirements. NOTE: All Dimension are in Millimeters Figure 1-7 iVIZION SS Version Unit Installation and Maintenance Space Requirements Diagram NOTE: If a maintenance space clearance ®...
  • Page 25: Ivizion Ld Specification Unit Dimensions

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 iVIZION LD Specification Unit Dimensions ® Figure 1-9 illustrates the iVIZION LD Unit Outside Dimensions. NOTE: All Dimension are in Millimeters Figure 1-9 iVIZION LD Version Unit Outside Dimensions ® Figure 1-10 illustrates the iVIZION LD Unit with Bezel Outside Dimensions.
  • Page 26: Various Cash Box Unit Dimensions

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information Various Cash Box Unit Dimensions TANDARD UTSIDE IMENSIONS ® Figure 1-11 illustrates the iVIZION Standard Cash Box Outside Dimensions. NOTE: All Dimension are in Millimeters Figure 1-11 iVIZION Standard Cash Box Outside Dimensions ARGE UTSIDE IMENSIONS...
  • Page 27: International Compliance

    General Information iVIZION® Series Next-Generation Banknote Acceptor Unit Section 1 International Compliance • RoHS Directives • UL & c-UL Marks File No. E142330, Subscriber 857947001, Vo.2 • CE Mark • CB Scheme NO58326 • FCC Directives Contains Transmitter Module FCC ID: VZQNRWA3 MODEL NO.: NRWA3 IC: 8285A-NRWA3 This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
  • Page 28: Technical Contact Information

    Section 1 iVIZION® Series Next-Generation Banknote Acceptor Unit General Information Technical Contact Information & O MERICAS CEANIA JCM American JCM Gold (HK) Ltd. Phone: +1-702-651-0000 Phone: +852-2429-7187 Fax: +1-702-644-5512 Fax: +852-2929-7003 925 Pilot Road, Las Vegas, NV 89119 Unit 1-7, 3/F., Favor Industrial Centre E-mail: customerservice@jcmglobal.com 2-6 Kin Hong Street, Kwai Chung, &...
  • Page 29: Installation

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 2 2 INSTALLATION This section provides installation and operating ® instructions for the iVIZION Series Next-Gen- eration Banknote Acceptor Unit. The information within contains the following features: •...
  • Page 30: Cable Interconnection

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation Table 2-2 JCM Private Line DIP Switch Setting ® NOTE: When installing the iVIZION Validation CPU Board JP1 Version Unit into a related Machine, refer to the iVIZION Optional LD Version Unit Installation detailed information on page 2-9.
  • Page 31: Connector Pin Assignments

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 Connector Pin Assignments Table 2-6 lists the iVIZION SS/LD Interface Connector Pin Assignments. Table 2-6 iVIZION SS/LD USB Connection Pin Assignments Back Side View Socket Housing (Transport Unit Side): DR1B026JA1 (JCM) Pin Housing (Frame Side): DR1R026PA1 (JCM) Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 &...
  • Page 32: Connector Pin Assignments (Continued 1)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation ONNECTOR SSIGNMENTS ONTINUED Table 2-7 lists the iVIZION SS/LD Photo-Coupler Connector Pin Assignments. Table 2-7 iVIZION SS/LD Photo-Coupler Connector Pin Assignments Back Side View Socket Housing (Transport Unit Side): DR1B026JA1 (JCM) Pin Housing (Frame Side): DR1R026PA1 (JCM) Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 &...
  • Page 33: Connector Pin Assignments (Continued 2)

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 ONNECTOR SSIGNMENTS ONTINUED Table 2-8 lists the iVIZION SS/LD RS232C Connector Pin Assignments. Table 2-8 iVIZION SS/LD RS232C Connector Pin Assignments Back Side View Socket Housing (Transport Unit Side): DR1B026JA1 (JCM) Pin Housing (Frame Side): DR1R026PA1 (JCM) Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 &...
  • Page 34: Connector Pin Assignments (Continued 3)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation ONNECTOR SSIGNMENTS ONTINUED Table 2-9 lists the iVIZION SS/LD ccTalk Connector Pin Assignments. Table 2-9 iVIZION SS/LD ccTalk Connector Pin Assignments Back Side View Socket Housing (Transport Unit Side): DR1B026JA1 (JCM) Pin Housing (Frame Side): DR1R026PA1 (JCM) Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 &...
  • Page 35: Connector Pin Assignments (Continued 4)

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 ONNECTOR SSIGNMENTS ONTINUED Table 2-10 lists the iVIZION SS/LD TTL Connector Pin Assignments. Table 2-10 iVIZION SS/LD TTL Connector Pin Assignments Back Side View Socket Housing (Transport Unit Side): DR1B026JA1 (JCM) Pin Housing (Frame Side): DR1R026PA1 (JCM) Contact Type (Frame Side): D02-22-26P-10000 (JAE) (Poles except 1, 9, 18 &...
  • Page 36: Connector Pin Assignments (Continued 5)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation ONNECTOR SSIGNMENTS ONTINUED Table 2-11 lists the iVIZION SS/LD Bezel Connector Pin Assignments. Table 2-11 iVIZION SS/LD Bezel JPL (CN7) Connection Pin Assignments Front Side View Embossed ID Pin No.4 Polarizing Pin Connector Box Pin Header (Control CPU Board Side): A3B-8PA-2DS (71) (HRS) JCM Custom Socket Housing (Bezel Side): A3B-8D-2C (HRS)
  • Page 37: Cleaning Procedure

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 iVIZION Optional LD Version Unit Installation Mounting holes are provided in the LD Frame Unit ® to attach the iVIZION LD Unit to a related Machine during installation. Perform the following ®...
  • Page 38: Ivizion Sensor Locations

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation iVIZION Sensor Locations ® Figure 2-10 illustrates and Table 2-12 lists the iVIZION various Sensor and Sensor Lens locations. Hidden Figure 2-10 iVIZION Sensor Cleaning Locations Table 2-12 iVIZION Sensor Cleaning Location Types Sym.
  • Page 39: Standard Interface Circuit Schematics

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 Standard Interface Circuit Schematics ® Figure 2-11 illustrates the iVIZION USB Circuit Interface Schematic Diagrams. Controller Side iVIZION Side NOTE: The Controller Circuit Schematic is for reference only and does not guarantee the actual Machine’s functional operation.
  • Page 40: Interface Circuit Schematics (Continued 1)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation NTERFACE IRCUIT CHEMATICS ONTINUED ® Figure 2-13 illustrates the iVIZION RS232C Circuit Interface Schematic Diagrams. Controller Side iVIZION Side NOTE: The Controller Circuit Schematic is for reference only and does not guarantee the actual Machine’s functional operation.
  • Page 41: Interface Circuit Schematics (Continued 2)

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 NTERFACE IRCUIT CHEMATICS ONTINUED ® Figure 2-14 illustrates the iVIZION TTL Circuit Interface Schematic Diagrams. Controller Side iVIZION Side NOTE: The Controller Circuit Schematic is for reference only and does not guarantee the actual Machine’s functional operation.
  • Page 42: Interface Circuit Schematics (Continued 3)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation NTERFACE IRCUIT CHEMATICS ONTINUED ® Figure 2-16 illustrates the iVIZION LED Circuit Interface Schematic Diagrams. Bezel Side iVIZION Side NOTE: Refer to the Caution description stated below this Figure in order to ensure that each Current Limiting Resistance Value is correctly chosen.
  • Page 43: Operational Flowchart (Continued 1)

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 Operational Flowchart ® Figure 2-17 depicts a typical iVIZION SS/LD Banknote acceptance flow process (Initialization). a) Initializing C) Stand-by return from Figure 2-19. b) Enter Stand-by Mode c) Enable Accept? d) LED Display Extinguished e) LED Display shows Enable Light f) Is Banknote inserted? g) Feed Banknote In...
  • Page 44: Figure 2-18 Ivizion Ss Banknote Acceptor Operational Flowchart (Part 2 Validating)

    Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation PERATIONAL LOWCHART ONTINUED ® Figure 2-18 depicts a typical iVIZION SS Banknote flow process (Validation). A) Begin Validating a) Is Validation Result OK? b) Is Banknote Unacceptable? c) Output the Denomination Value Signal d) Receive Stacking Command? e) Reject Banknote f) Continue Transporting Banknote...
  • Page 45: Operational Flowchart (Continued 2)

    Installation iVIZION® Series Next-Generation Banknote Acceptor Unit Section 2 PERATIONAL LOWCHART ONTINUED ® Figure 2-18 depicts a typical iVIZION LD Banknote flow process (Validation). A) Begin Validating a) Is Validation Result OK? b) Is Banknote Unacceptable? c) Output the Denomination Value Signal d) Receive Stacking Command? f) Continue Transporting Banknote g) Is Banknote sent to Stacker?
  • Page 46 Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation THIS PAGE INTENTIONALLY LEFT BLANK P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 2 - 1 8...
  • Page 47: Communications

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 3 3 COMMUNICATIONS This section was intentionally left out due to a Non-Disclosure Agreement requirement. If this information is required, please contact the closest office location listed below: &...
  • Page 48 iVIZION® Series Next-Generation Banknote Acceptor Unit THIS PAGE INTENTIONALLY LEFT BLANK P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 3 - 2...
  • Page 49: Disassembly/Reassembly

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 4 4 DISASSEMBLY/REASSEMBLY This section provides disassembly and reassembly ® instructions for the iVIZION Next-Generation Banknote Acceptor Unit. This section contains the  following information: • Tool Requirements •...
  • Page 50: Figure 4-6 Right Frame Outer "R" Removal

    Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly 6. Remove the two (2) screws (See Figure 4-4 a & ) retaining the two (2) Flat Leaf Springs (See Figure 4-4 b & b ). Remove the two (2) Flat Springs, the single (1) Stacker Guide (See Figure 4-4 c), the single (1) Retainer Pin (See Figure 4-4 d), the two (2) Rollers (See Figure 4-4 e...
  • Page 51: Home Position Sensor Board/Home Position Sensor, Ffc & Interface Connector Board Removals

    Disassembly/Reassembly iVIZION® Series Next-Generation Banknote Acceptor Unit Section 4 4. Use a small Screwdriver to release the five (5) NOTE: When replacing the Frame Outer Click-tab Stops of TR Side Cover “A” (See Fig- “L” Assembly, ensure that the Plate Nut is ure 4-10 a through a ), and remove TR Side...
  • Page 52: Rfid Module & Harness Removals

    Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly RFID Module & Harness Removals 2. Remove the single (1) mounting Screw (See Figure 4-14 a) and remove the Optional To remove the RFID Module and RFID Harness Extension Memory Board if installed (See Figure proceed as follows: 4-14 b) from the assembled Extension Memory Board.
  • Page 53: Validation Unit Harness Removal

    Disassembly/Reassembly iVIZION® Series Next-Generation Banknote Acceptor Unit Section 4 NOTE: When installing new FPCs, fold-up along the Solid Lines and fold-down along the Dashed Lines before setting them in place. Once an FPC is folded, DO NOT refold it back again or in the opposite direction once folded! Figure 4-18 Validation Unit Harness Removal Interrupter Board Removal...
  • Page 54: Stacker Motor & Transport Motor Removals

    Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly NOTE: When re-assembling Drive Mod FR NOTE: When reassembling the TR-ST “A”, ensure that it mates directly with the Motor Gear, a Motor Gear Assembly “D” Plane of the Drive Shaft. Pressure Bar will be required.
  • Page 55: Validation Sensor Board Assembly Removal

    Disassembly/Reassembly iVIZION® Series Next-Generation Banknote Acceptor Unit Section 4 3. Remove the two (2) screws (See Figure 4-27 c & ) retaining the Validation Sensor Assembly Board. 4. Unplug the two (2) FPC Cables (See Figure 4-27 & d ) and the two (2) FFC Cables (See Figure 4-27 e &...
  • Page 56: Validation Sensor Fpc Cable Removals

    Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly Validation Sensor FPC Cable NOTE: When reassembling the Unit, Removals ensure that the right and left side Pins are correctly repositioned when reset into To remove the Validation Sensor FPC Cables,  place.
  • Page 57: Cis/Cis Fpc/Lower Uv Sensor & Lower Uv Ffc Removal

    Disassembly/Reassembly iVIZION® Series Next-Generation Banknote Acceptor Unit Section 4 4. Remove the four (4) CIS Sensor Mounting Screws (See Figure 4-32 a through a ) and remove the CIS Sensor (See Figure 4-32 b) from the Upper Validation Section. NOTE: When reassembling the Unit, ensure that the UV Sensors are correctly re- positioned when set in place (See “Reassembly Cautions”...
  • Page 58: Validation Unit Timing Belt Removal

    Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly 4. Remove the four (4) CIS Sensor Mounting Screws (See Figure 4-35 a through a ), and remove the CIS Sensor (See Figure 4-35 b) and the CIS FPC Cable (See Figure 4-35 c) off of the Lower Validation Section.
  • Page 59: Wiring Diagrams

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 5 5 WIRING DIAGRAMS • ® System Wiring Diagram. This chapter provides the iVIZION Next-Gen- eration Banknote Acceptor Unit Wiring Diagrams for the following items: iVIZION System Wiring Diagram Figure 5-1 iVIZION System Wiring Diagram P/N 960-100929R_Rev.
  • Page 60 Section 5 iVIZION® Series Next-Generation Banknote Acceptor Unit Wiring Diagrams THIS PAGE INTENTIONALLY LEFT BLANK P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 5 - 2...
  • Page 61: Calibration And Testing

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 6 6 CALIBRATION AND TESTING Application Software Installation This section provides Calibration and Performance ® Testing instructions for the iVIZION Next-Gen- Perform the following steps to install the “JCM eration Banknote Acceptor Unit and contains the...
  • Page 62: Driver Installation Procedure

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing Figure 6-5 Customer Information Screen Figure 6-8 Installation Completion Screen 8. Mouse-click on the “Finish” Screen Button to NOTE: The “OEM” in “Last Name:” and “Organization:” fields are default settings. end the installation process.
  • Page 63: Jcm Tool Suite Standard Edition Mode

    Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 JCM Tool Suite Standard Edition Mode The following two (2) mode feature types exist in the “ ” package: JCM Tool Suite Standard Edition • Normal Mode • Test Mode. “...
  • Page 64: Software Download Procedures

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing Software Download Procedures The following two (2) types of download proce- ® dures exist, depending on the iVIZION operating conditions: ® • ® iVIZION contains the “iVIZION Software Program already installed” (Upgrading) •...
  • Page 65: Downloading The Program First Time

    Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 Figure 6-21 Download Progress Screen 1 Figure 6-24 JCM Tool Suite Standard Edition 11. When the download is complete, the “ Download Screen 2 Success. Reset Done. Waiting for USB Cable 6.
  • Page 66: Calibration

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing Calibration This section provides instructions for performing a calibration of the Acceptor Unit Sensors and the ® Transport Unit Sensors within the iVIZION Device. When to Calibrate Calibration should be performed when one of the following four (4) conditions occur: 1.
  • Page 67: Placing The Ks-072 Reference Paper

    Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 3. Firmly close the Upper Guide (See Figure 6-33 a) until it “clicks” into place, and ensure that both sides are tightly closed and locked in place. ® a) iVIZION Device b) Power Supply c) PC (OS: Windows XP) (iVIZION USB Driver...
  • Page 68: Figure 6-36 Ivizion Calibration Ver.x.xx Screen

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing Once the three (3) Sensor Calibration Procedures are complete, the “ ” Calibration Information Screen shown in See Figure 6-39 will re-appear. Figure 6-39 Calibration Information Screen 2 8. Remove the Cash Box to perform the Home  Position Sensor Calibration Procedure.
  • Page 69: Figure 6-42 Exit Calibration Proceeding Screen

    Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 16. Remove the KS-072 Reference Paper and Mouse-click on the “ ” Screen Button (See Figure 6-45 a) to begin the UV Sensor  Non-Paper Calibration. Once the UV Sensor Non-Paper Calibration is complete, the “...
  • Page 70: Calibration Plus Serial Number Writing

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing located at the bottom of the Screen to either increase or decrease the numbers, or change the existing numbers using the “ ” or “ ” Triangle   Button (See Figure 6-52 a). 5.
  • Page 71: Performance Test Tool Requirement Using A Pc

    Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 Performance Test Tool Requirement PC Performance Test Preparation using a PC Perform following steps to begin the Performance Figure 6-55 illustrates and list identifies the Tools Test Preparation Procedure: and Equipment Interconnects required to perform a ®...
  • Page 72: Performance Test Procedures

    Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing 9. Mouse-click on each Screen Button to begin its related Performance Test. A Screen similar the Screen shown in Figure 6-59 will appear for each Test. For more detail concerning each Perfor- mance Test, refer to “Performance Test Items using a PC”...
  • Page 73: Sensor On/Off Test

    KF srl | www.keyfuture.com | Phone +39 059313920 Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 4. Check the Status LED’s condition. When the  Table 6-4 Sensor Actions and Conditions (Cont.) Status LED Indicator blinks in a Red, Green, and Blue Color sequence, the Status LED is perform- Action...
  • Page 74: Icb Function Setting (Barcode Coupon)

    5. Once the Status LED begins blinking normally, Tests being performed (The Figure 6-65 example insert a “ ” Barcode Coupon in order JCM Global shows DIP Switch #3 and #5, plus DIP Switch #8 to configure the Machine Number for the all set to ON).
  • Page 75: Performance Test Tool Requirement Using An External Dip Switch Box

    KF srl | www.keyfuture.com | Phone +39 059313920 Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 5. Mouse-click on the “ ” DIP Sw ON/OFF Test Screen Button (Review Figure 6-58 i) to begin the DIP Switch ON/OFF Test. 6.
  • Page 76: Ivizion Utility Tools

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing ICB/Image Setting Change Preparation 6. Set the External Switch Box Switch to the posi- tion away from the Status LED on the Box. Perform the following steps to set or reset the ICB ®...
  • Page 77: Icb Function Setting

    KF srl | www.keyfuture.com | Phone +39 059313920 Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 ICB E ETTING NABLE ISABLE UNCTIONS The following portion explains each ICB setting when activated: 1. Mouse-click on the large “ ” 2) ICB SETTING Screen Button (See Figure 6-73 a) located on the “...
  • Page 78: Figure 6-75 Enable Setting Completion

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing Setting the M/C # This setting allows the individual fourteen (14) ® digit Machine Code Number on the iVIZION be entered. The Machine Number helps to identify ®...
  • Page 79: Icb Function Operational Condition

    KF srl | www.keyfuture.com | Phone +39 059313920 Calibration and Testing iVIZION® SeriesNext-Generation Banknote Acceptor Unit Section 6 Setting Inhibit ICB System To retrieve the current ICB Function Setting in a Cash Box proceed as follows: To record an ICB Function Inhibit setting in the 1.
  • Page 80 Section 6 iVIZION® SeriesNext-Generation Banknote Acceptor Unit Calibration and Testing 13920 THIS PAGE INTENTIONALLY LEFT BLANK P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 6 - 2 0...
  • Page 81: Exploded Views & Parts Lists

    iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 7 7 EXPLODED VIEWS & PARTS LISTS This section provides product exploded views and • iVIZION Validation Unit Exploded View parts lists for the ® Next-Generation Bank- iVIZION •...
  • Page 82: Ivizion Entire Unit Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Entire Unit Parts List Table 7-1 iVIZION Entire Unit Parts List Ref No. EDP No. Description Remark See Table 7-2 through Table 7-4 for 148069 iVIZION Validation Unit details regarding the Validation Unit Parts See Table 7-5...
  • Page 83: Ivizion Validation Unit 1 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Validation Unit 1 Exploded View Figure 7-2 iVIZION Validation Unit 1 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 3...
  • Page 84: Ivizion Validation Unit 1 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Validation Unit 1 Parts List Table 7-2 iVIZION Validation Unit 1 Parts List Ref No. EDP No. Description Remark 147804 iVIZION Head Cover A 147805 iVIZION Head Cover B 147828 Head Open Stopper 147768...
  • Page 85: Ivizion Validation Unit 2 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Validation Unit 2 Exploded View Figure 7-3 iVIZION Validation Unit 2 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 5...
  • Page 86: Ivizion Validation Unit 2 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Validation Unit 2 Parts List Table 7-3 iVIZION Validation Unit 2 Parts List Ref No. EDP No. Description Remark 147803 iVIZION Head Frame B 147807 iVIZION Head Bill Guide 85B 147813 Head Open Latch A 147823...
  • Page 87: Ivizion Validation Unit 3 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Validation Unit 3 Exploded View Figure 7-4 iVIZION Validation Unit 3 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 7...
  • Page 88: Ivizion Validation Unit 3 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Validation Unit 3 Parts List Table 7-4 iVIZION Validation Unit 3 Parts List Ref No. EDP No. Description Remark 147802 iVIZION Head Frame A 147806 iVIZION Head Bill Guide 85A 147808 Head Drive Frame 147809...
  • Page 89: Ivizion Transport Unit 1 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 1 Exploded View Figure 7-5 iVIZION Transport Unit 1 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 9...
  • Page 90: Ivizion Transport Unit 1 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 1 Parts List Table 7-5 iVIZION Transport Unit 1 Parts List Ref No. EDP No. Description Remark 147831 Transport Side Cover A 147832 Transport Side Cover B 147841 Transport Removal Arm A 147842...
  • Page 91: Ivizion Transport Unit 2 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 2 Exploded View Figure 7-6 iVIZION Transport Unit 2 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 1 1...
  • Page 92: Ivizion Transport Unit 2 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 2 Parts List Table 7-6 iVIZION Transport Unit 2 Parts List Ref No. EDP No. Description Remark 147833 Transport UP Frame 147834 Transport UP-Bill Guide Cover 147843 Bill Guide Open-Close Lever 147847...
  • Page 93: Ivizion Transport Unit 3 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 3 Exploded View Figure 7-7 iVIZION Transport Unit 3 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 1 3...
  • Page 94: Ivizion Transport Unit 3 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 3 Parts List Table 7-7 iVIZION Transport Unit 3 Parts List Ref No. EDP No. Description Remark 147835 Transport Bottom Cover 147836 Head Latch Cover 147837 Head Latch Button 147838...
  • Page 95: Ivizion Transport Unit 4 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 4 Exploded View Figure 7-8 iVIZION Transport Unit 4 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 1 5...
  • Page 96: Ivizion Transport Unit 4 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 4 Parts List Table 7-8 iVIZION Transport Unit 4 Parts List Ref No. EDP No. Description Remark 147830 Transport Main Frame 147849 Transport Light Guide E 147885 PCB Supporter 147895...
  • Page 97: Ivizion Transport Unit 5 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 5 Exploded View Figure 7-9 iVIZION Transport Unit 5 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 1 7...
  • Page 98: Ivizion Transport Unit 5 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 5 Parts List Table 7-9 iVIZION Transport Unit 5 Parts List Ref No. EDP No. Description Remark 147852 Drive Module Frame A 147879 iVIZION Reel A 147880 iVIZION Reel B 147752...
  • Page 99: Ivizion Transport Unit 6 Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Transport Unit 6 Exploded View Figure 7-10 iVIZION Transport Unit 6 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 1 9...
  • Page 100: Ivizion Transport Unit 6 Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Transport Unit 6 Parts List Table 7-10 iVIZION Transport Unit 6 Parts List Ref No. EDP No. Description Remark 147853 Drive Module Frame B 147854 Transport Gear Stabilizer 147879 iVIZION Reel A 147755...
  • Page 101: Ivizion Ss Version Frame Unit Exploded View

    Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION SS Version Frame Unit Exploded View Figure 7-11 iVIZION SS Version Frame Unit Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 2 1...
  • Page 102: Ivizion Ss Version Frame Unit Parts List

    Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION SS Version Frame Unit Parts List Table 7-11 iVIZION SS Version Frame Unit Parts List Ref No. EDP No. Description Remark 1001 147777 Frame Base 1002 147778 Frame Base Guide 1003...
  • Page 103: Ivizion Cash Box Unit 1 Exploded View

    KF srl | www.keyfuture.com | Phone +39 059313920 Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Cash Box Unit 1 Exploded View Figure 7-12 iVIZION Cash Box Unit 1 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} ©...
  • Page 104: Ivizion Cash Box Unit 1 Parts List

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Cash Box Unit 1 Parts List Table 7-12 iVIZION Cash Box Unit 1 Parts List Ref No. EDP No. Description Remark 147907...
  • Page 105: Ivizion Cash Box Unit 2 Exploded View

    KF srl | www.keyfuture.com | Phone +39 059313920 Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Cash Box Unit 2 Exploded View Figure 7-13 iVIZION Cash Box Unit 2 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} ©...
  • Page 106: Ivizion Cash Box Unit 2 Parts List

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Cash Box Unit 2 Parts List Table 7-13 iVIZION Cash Box Unit 2 Parts List Ref No. EDP No. Description Remark 1201...
  • Page 107: Ivizion Cash Box Unit 3 Exploded View

    KF srl | www.keyfuture.com | Phone +39 059313920 Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Cash Box Unit 3 Exploded View Figure 7-14 iVIZION Cash Box Unit 3 Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} ©...
  • Page 108: Ivizion Cash Box Unit 3 Parts List

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Cash Box Unit 3 Parts List Table 7-14 iVIZION Cash Box Unit 3 Parts List Ref No. EDP No. Description Remark 1301...
  • Page 109: Ivizion Ld Version Frame Exploded View

    KF srl | www.keyfuture.com | Phone +39 059313920 Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION LD Version Frame Exploded View Figure 7-15 iVIZION LD Version Frame Exploded View P/N 960-100929R_Rev. 3 {EDP #148849} ©...
  • Page 110: Ivizion Ld Version Frame Parts List

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION LD Version Frame Parts List Table 7-15 iVIZION LD Version Frame Parts List Ref No. EDP No. Description Remark 1401 206386...
  • Page 111: Ivizion Optional Components Exploded Views

    KF srl | www.keyfuture.com | Phone +39 059313920 Exploded Views & Parts Lists iVIZION® Series Next-Generation Banknote Acceptor Unit Section 7 iVIZION Optional Components Exploded Views Figure 7-16 iVIZION Optional Components Exploded Views P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited 7 - 3 1 KF srl | www.keyfuture.com | Phone +39 059313920...
  • Page 112: Ivizion Optional Components Parts List

    KF srl | www.keyfuture.com | Phone +39 059313920 Section 7 iVIZION® Series Next-Generation Banknote Acceptor Unit Exploded Views & Parts Lists iVIZION Optional Components Parts List Table 7-16 iVIZION Optional Components Parts List Ref No. EDP No. Description Remark 196590 iVIZION Bezel SS Type 1 RoHS Black/Green LED Blue/Blue LED ...
  • Page 113: Index

    KF srl | www.keyfuture.com | Phone +39 059313920 iVIZION® Series Next-Generation Banknote Acceptor Unit S e c t i o n 8 8 INDEX Banknote Jam PC Calibration … … clearing a Preparation for Performance Test … 6-11 6-15 Requirements for Calibration Performance Testing …...
  • Page 114 KF srl | www.keyfuture.com | Phone +39 059313920 iVIZION® Series Next-Generation Banknote Acceptor Unit INDEX THIS PAGE INTENTIONALLY LEFT BLANK © 2012, Japan CashMachine Co., Limited P/N 960-100929R_Rev. 3 {EDP #148849} 8 - 2 KF srl | www.keyfuture.com | Phone +39 059313920...
  • Page 115: A Troubleshooting

    KF srl | www.keyfuture.com | Phone +39 059313920 iVIZION® Series Next-Generation Banknote Acceptor Unit A p p e n d i x A A TROUBLESHOOTING Troubleshooting Overview This section provides Troubleshooting instructions ® for the iVIZION Series Next-Generation Bank- ® The iVIZION allows the operator to perform fault note Acceptor Unit.
  • Page 116: Error, Jam And Reject Code Tables

    KF srl | www.keyfuture.com | Phone +39 059313920 Appendix A iVIZION® Series Next-Generation Banknote Acceptor Unit TroubleShooting Table A-1 LED Code Condition (Continued) Power ON Status Symptoms Causes and Solutions The power is not being supplied. [Solution] • Ensure the harnesses are connected to the Interfaces. •...
  • Page 117 KF srl | www.keyfuture.com | Phone +39 059313920 TroubleShooting iVIZION® Series Next-Generation Banknote Acceptor Unit Appendix A Table A-2 LED Error Codes (Continued) Status LED Causes and Solutions Flash Color Errors Sequence An IC is malfunctioning. Damaged Board [Solution] The Control CPU Board or the Validation CPU Board may be damaged. Replace the Circuit Boards if necessary.
  • Page 118: Jam Error Codes

    KF srl | www.keyfuture.com | Phone +39 059313920 Appendix A iVIZION® Series Next-Generation Banknote Acceptor Unit TroubleShooting Jam Error Codes Table A-3 lists the various LED Jam Flash Code causes & solutions. Table A-3 Jam LED Flash Error Codes Status LED Causes and Solutions Flash Color...
  • Page 119: Reject Error Code

    KF srl | www.keyfuture.com | Phone +39 059313920 TroubleShooting iVIZION® Series Next-Generation Banknote Acceptor Unit Appendix A Reject Error Code Table A-4 is the LED Reject Error Flash Codes causes & solutions. Table A-4 LED Reject Codes Status LED Causes and Solutions Flash Color Errors...
  • Page 120: Maintenance Equipment

    KF srl | www.keyfuture.com | Phone +39 059313920 Appendix A iVIZION® Series Next-Generation Banknote Acceptor Unit TroubleShooting Maintenance Equipment ® This portion provides product information for the iVIZION Maintenance Equipment. iVIZION Maintenance Equipment NOTE: Only the European NOTE: Only the European Style Connector Version is shown here.
  • Page 121: B Glossary

    KF srl | www.keyfuture.com | Phone +39 059313920 iVIZION® Series Next-Generation Banknote Acceptor Unit A p p e n d i x B B GLOSSARY Acceptor – a term used in Communication Section 3 referencing functions sent to, and  received from the Banknote Acceptor by software commands…...
  • Page 122 KF srl | www.keyfuture.com | Phone +39 059313920 Appendix B iVIZION® Series Next-Generation Banknote Acceptor Unit 10 FFC – an acronym for Flat Flexible Cable. This type of Cable contains printed circuit traces  in it, and is generally used to interconnect and distribute signal information between  various Printed Circuit Boards…...
  • Page 123 KF srl | www.keyfuture.com | Phone +39 059313920 Appendix B iVIZION® Series Next-Generation Banknote Acceptor Unit performance… See Page 6-7 21 RFID – an acronym for Radio Frequency IDentification… See Page 1-2 & 4-4 22 RS232C –a common serial data communication standard protocol… See Page 2-5 23 Sensor –...
  • Page 124 KF srl | www.keyfuture.com | Phone +39 059313920 iVIZION® Series Next-Generation Banknote Acceptor Unit Issue #4074-SME-01-03 P/N 960-100929R_Rev. 3 {EDP #148849} © 2012, Japan CashMachine Co., Limited KF srl | www.keyfuture.com | Phone +39 059313920...

This manual is also suitable for:

Ivizion ldIvizion ss

Table of Contents

Save PDF