Auto Sequence; Keypad Tones; Image Parameters - Swann DVR4/9-SecuraNet SW242-4SN User Manual

6.18 Miscellaneous Setup - Auto Sequence
To activate Auto Sequence mode, press [ ] button during monitoring or
recording mode. To exit auto sequence display, press [MENU] or any of
channel selection buttons.
6.19 Miscellaneous Setup - Keypad Tones
'
6.20 Miscellaneous Setup - Image Parameters
Auto sequence function allows you to
view each active video channel in full screen
mode and display alternately. Auto
Sequence dwelling time can be also
adjusted to 1, 2, 5, 10, 15, 30 or 60 seconds,
or turn it off by choosing OFF.
This function allows you the mute the
buzzer when pressing a button. Press [SEL]
to select ON or OFF.
You can adjust the image parameters
according to your needs.
Move the cursor to this selection and press
◄ or ► button to select a channel you want to
adjust, then press [SEL] button to edit
parameters.
15