Accessing The Dvr Without Video Viewer; Via Internet Explorer - Swann DVR4-5500TM Operating Instructions Manual

19” all-in-one digital video recorder
Table of Contents

Advertisement

DVR4-5500™

6.3 Accessing the DVR without Video Viewer

If you are away from your DVR and want to access the footage on it or configure your recording options, you can gain
access to the DVR via Internet Explorer (Windows) window or QuickTime Player (Mac).
6.3.1 Accessing your DVR via Internet Explorer
To do this, open up an Internet Explorer browser window, or a Mozilla Firefox browser window. Be sure that your
copy of your Internet browser is up to date.
In the address bar, type the address of the DVR – the PRIVATE IP ADDRESS if you are on the same local network
as the DVR, the PUBLIC IP ADDRESS if you are accessing the unit remotely (see 6.1).
#
NAME
Home
1
Config
2
PTZ
3
Channel
4
Selection
5
Display Mode
6
Menu / Arrows
7
Event
8
Snapshot
9
Keylock
10
Enter
11
Digital Zoom
12
Search
13
Playback
14
Controls
Web
15
Transmission
Quality
16
Resolution
17
Audio Channel
18
ICON
Returns you to the main window for the DVR
Access the detailed DVR settings.
Not applicable for this model.
Chooses which channel is being viewed.
Changes the channel being viewed.
Cylces between split screen mode and sequential viewing (one
channel at a time).
Click the centre to enter the menu / exit the menu mode. The
arrows navigate between options whilst the menu is open.
Enter the Event Playback screen.
Takes a still image from the video footage. This will open in a
new browser window.
Locks the DVR. To unlock it, enter your password and click
Confirms a setting or selection.
Increases or decreases magnification of the viewed image.
Opens the detailed search window.
Plays, stop, fast forward, rewind, pause and slow playback
controls. They operate in the same manner as those on the
infrared remote control.
Changes the type of video being streamed over the Internet.
There are two options available: H.264 (default) and QuickTime.
Ensure you have a working copy of QuickTime installed before
changing transmission type.
Choose a quality setting from BASIC, NORMAL, HIGH and
BEST. The higher the quality of video, the more bandwidth it will
require. If playback is pausing frequently or distorting, try a lower
quality setting.
Changes the resolution between 480 and 240 lines. Again, more
lines require more bandwidth.
Turns the audio channel on or off.
22
Operating Instructions
DESCRIPTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sw349-da9Dvr4-5500

Table of Contents