Advertisement
http://www.remotecentral.com/cgi-bin/codes/
To use, place the IR blaster so that it is three to five feet from the item to be controlled, facing the item's
infrared receiver.
Figure 10: Face of the IR blaster
Next, navigate on your browser to your Kit's dashboard. Click on the Environment tab on the left hand side.
You will be presented with a screen which includes a place where the Pronto code can be entered as shown
in Figure 11.
Figure 11: Entering Pronto codes for the IR blaster
7. For information about how to remove or replace the battery in any of the devices, scan the QR code below,
or use the Chrome web browser to navigate to https://qrgo.page.link/iWxb.
Note: Regulations require that the battery must be removed from the device when shipping or flying by air.
Alternatively, you can re-insert the plastic tabs to disrupt the battery current.
Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation
Advertisement
