Advertisement
5. Remove the cover plate on the first mini-hub. If necessary, attach the power adapter before plugging-in the
mini-hub to a wall socket as shown in Figure 5.
Figure 5: Plug-in the mini-hub
6. You will know the mini-hub is connected to the hotspot when the light on top turns green as shown in
Figure 6
Figure 6: Mini-hub connected to hotspot
Setting-up the sensors
In this Kit, we are monitoring room or desk use, temperature, humidity and leaks. To this end, set up the sensors
as follows.
1. Grid-EYE® Infrared Array Sensors are most effective if mounted on the ceiling or inside of a lighting fixture.
Use the adhesive tape provided with the sensor to mount it in an appropriate location in your conference
room. The Grid-EYE sensor can be used to determine the number of people occupying a room. The sensor
begins the count when motion is detected and provides an update approximately every 5 minutes
thereafter.
2. Window/door sensors can be mounted on either side of the window frame or door frame, as illustrated in
Figure 7.
Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation
Advertisement
