Led Indicators - Semtech IOT8EUSBREF-1 User Manual

Mini-hub LED status indicators and button functionality

LED indicators

Table 1 shows what the various LED colors and blink patterns displayed by the mini-hub indicate.
Color(s) Blink Pattern
GREEN blinking 1 sec
GREEN blinking 1/4 sec
GREEN Solid
GREEN/ blinking 1/4 sec
ORANGE
ORANGE blinking 1/4 sec
ORANGE blinking 1 sec
Table 1: LED Status Indicators
Button Functionality

To switch from GW (gateway) mode to CONFIG mode, press the Setup button for 10 seconds.

To reboot the mini-hub, while in CONFIG mode, press the Setup button for 5 seconds.

To return the mini-hub to factory settings, (and delete the Wi-Fi and Network Server credentials), press the
Reset button for 5 seconds.
Support
For any additional questions about operation or help with troubleshooting please contact
SBKSupport@semtech.com
For more information about LoRa®, LoRaWAN® or the hardware contained within the kit please contact
SBKSales@Semtech.com
Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation
Mode Status
GW Wi-Fi STA not connected
GW Wi-Fi STA connected, establishing connection to LNS, configuring
radio
GW Wi-Fi STA connected, STA on connected to LNS, radio listening
GW Wi-Fi STA connected, CUPS transaction in progress
Note: Do not unplug device in this state
CONFIG Scanning Wi-Fi networks, setting up configuration AP
CONFIG Configuration AP active