Camera Select; Record Select - Swann DVR4-1100 User Manual

MAIN MENU

CAMERA SELECT

RECORD SELECT

RESOLUTION
RECORD FRAME
RECORD QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
MOTION SET
VIDEO MODE
FACTORY RESET
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
If a channel is disabled, the system will display "OFF" on the monitor,
meanwhile, this channel won't be selected to record. (Refer to 5.3 Record Select)
5.3 Record Select
Configure which channel is allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected.
1 2 3 4
[
1 2 3 4
EACH
25
[ Up] and [ Down]: move the cursor
HIGH
[ SEL]: select/modify settings
PAL
[
The DVR system can display 4
cameras feed in one picture (Quad Mode).
You can configure which camera is
displayed.
Press [ SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
- 6 -
Menu]: enter system menu
Menu]: press again to exit
User's Manual