Trouble shooting
Problem
Chisel drop off
Machine does not work
Poor performance
PAH 1700 B2
Possible cause
Chisel holder (9) does
not lock
No mains power
Worn carbon brushed
Motor defective
Dull chisel
Apply excessive
pressure on appliance
Lower stroke rate
Grease used out
Remedy
Reinsert the chisel (see" Fitting
and removing the chisel")
Check cable and plug, repair
by a qualified person.
Repair by a qualified person.
Repair by a qualified person.
Use a new chisel
Use proper pressure on
appliance
Increase the stroke rate (see "
Preselecting the stroke rate" )
Adding grease (see
"Maintance and cleaning")
GB
IE
NI
13