Introduction; Intended Use; Depicted Components; Package Contents - Parkside PAH 1700 B2 Translation Of The Original Instructions

DEMOLITION HAMMER
GB
PAH 1700 B2
IE
NI

Introduction

Congratulations on the purchase of your new
appliance.
You have chosen a high-quality product.
The operating instructions are part of this
product. They contain important information
about safety, usage and disposal. Before
using the product, please familiarise yourself
with all operating and safety instructions.
Use the product only as described and for
the range of applications specified. Please
also pass these operating instructions on to
any future owner.

Intended use

The demolition hammer is suitable for
chiselling into concrete, stone and plaster.
Any other usage or modification of the
appliance is deemed to be improper and
carries a significant risk of accidents.
The manufacturer accepts no responsibility
for damage(s) attributable to misuse.
The appliance is not intended for commercial
use.
This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the product by
a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the product.

Depicted components

Figure A:
1. Grease cap
2. Main switch trigger
3. Main handle
4. Speed dial
5. Auxiliary handle
6. Auxiliary handle knob
7. Chisel adjustment collar
2
8. Chisel locking collar
9. Chisel holder (invisible)
10. Chisel holder dust cap
11. Flat chisel
12. Pointed chisel
13. Carbon brush
14. Grease
15. 3mm Allen wrench

Package contents

1pc demolition hammer
1pc auxiliary handle
1pc flat chisel
1pc pointed chisel
1pair of carbon brushes
1pc 50g grease bag
1pc 3mm Allen wrench
1pc manual
1pc BMC

Technical data

Nominal power:
Nominal voltage:
Stroke rate:
Stroke energy:
Chisel assembly
Chisel adjustment
Protection class
Noise emission value:
Noise measurement value determined in
accordance with EN 60745. The A-rated
noise level of the tool is typically:
Chiselling:
Sound pressure level: L
Uncertainty
Sound power level: L
Uncertainty
Guaranteed sound power level L
Total vibration value:
Total vibration value (vector total of three
directions) determined in accordance with EN
60745:
1700 W
230 - 240 V~50 Hz
20 - 2100 bpm
50 joule
Toolless
12 positions
ll/
= 82.8 dB(A)
pA
K: 2.36 dB
= 102.8 dB(A)
WA
K: 2.36 dB
= 105dB(A)
wA
PAH 1700 B2