Power Supply Configuration - Huawei S6700 Series Hardware Description

S6700 Series Ethernet Switches
Hardware Description
Table 2-19 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
ETH Management Port
You can connect a switch to a configuration terminal or network management workstation
through the ETH management port to configure the switch locally or remotely. The port must
use a
management port in the BootLoad menu. File transfer through the ETH management port is
faster than transfer through the console port. For details on how to use the ETH management
port, see the Configuration Guide - Basic Configurations.
of an ETH management port.
Table 2-20 Attributes of an ETH management port
Attribute
Connector type
Standards
compliance
Working mode
Maximum
transmission
distance
USB Port
The USB port can have a USB flash drive connected to upgrade the switch, or transfer
configuration files or other files. The USB flash drive used on an S6720-EI switch must support
USB 1.1 or USB 2.0 and be compatible with the Linux operating system.

2.5.5 Power Supply Configuration

Issue 12 (2015-07-31)
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
network cable. You can choose to download the software package through the ETH
Description
RJ45
IEEE802.3
10/100 Mbit/s auto-sensing
Full duplex
100 m
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 2-20 describes the attributes
2 Chassis
37