Port Description - Huawei S6700 Series Hardware Description

S6700 Series Ethernet Switches
Hardware Description

2.5.4 Port Description

10GE SFP+ Ethernet Optical Port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives
service data at 1000 Mbit/s or 10 Gbit/s.
Ethernet optical port.
Table 2-17 Attributes of a 10GE SFP+ Ethernet optical port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Working mode
40GE QSFP+ Ethernet Optical Port
A 40GE QSFP+ optical port sends and receives service traffic at 40 Gbit/s and can be split into
four 10GE ports. After a split, 40GE QSFP+ optical port needs to be connected to a remote
device using a 1-to-4 QSFP+ fiber (with matching optical modules) or a 1-to-4 QSFP+ copper
cable.
Table 2-18 Attributes of a 40GE QSFP+ optical port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Working mode
Console Port
The console port is connected to a console for on-site configuration. The port must use a
cable. The console port is used when a switch is powered on for the first time. For details about
the attributes of a console port, see
Issue 12 (2015-07-31)
Description
LC/PC
Depend on the optical module used (see
+ Modules)
IEEE802.3ae
GE/10GE auto-sensing
Full-duplex
Table 2-18 describes the attributes of a 40GE QSFP+ optical port.
Description
MPO/LC
Depend on the optical module used (see
IEEE802.3ba
Full-duplex
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 2-17 describes the attributes of a 10GE SFP+
Table 2-19.
2 Chassis
SFP/eSFP Modules and
QSFP+ Modules)
SFP
console
36