Huawei S6700 Series Hardware Description page 27

S6700 Series Ethernet Switches
Hardware Description
Numbe
r
5
6
7
Table 2-5 Description of service port indicators in different modes
Display Mode
Status
Speed
Issue 12 (2015-07-31)
Indicator/ Color
Button
Red
Mode switch -
button
Service port Meanings of service port indicators vary in different modes.
indicator For details, see
ETH indicator Green
Color
-
Green
Yellow
Green and
yellow
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Steady on: The service port indicators
show the stack ID of the switch. After 45
seconds, the service port indicators
automatically restore to the status mode.
l When you press this button once, the
mode indicator turns green and the
service port indicators show the speed
of each service port.
l When you press this button a second
time, the mode indicator turns red and
the service port indicators show the
stack status.
l When you press this button a third time,
the mode indicator turns off.
If you do not press the button within 45
seconds, the mode indicator restores to
status mode.
Table 2-5.
l Off: No link is established on the port.
l Steady on: The port is connected.
l Blinking: The port is sending or
receiving data.
Description
Off: The port is not connected or has been
shut down.
Steady on: The port is connected.
Blinking: The interface is sending or
receiving data.
l Off: The port is not connected or has
been shut down.
l Both steady on: The port is operating at
a speed of 1000 Mbit/s.
l Both blinking: The port is operating at
a speed of 10 Gbit/s.
2 Chassis
18