Typical Connection; Remote Amperage Control For Welding Power Source Without; Remote Control Switch - Miller RFCS-5 Owner's Manual

1-2. Typical Connection

1

1-3. Remote Amperage Control For Welding Power Source Without

Remote Control Switch

Select Weld Process
OM-844 Page 2
2
Select Range And Polarity
!
1
2
Insert plug into matching 14-sock-
et, 5-socket, or 6-socket recep-
tacle, as applicable, on welding
power source. Tighten collar.
Approximately
Select Maximum
Amperage Percentage.
50% = Approx. 33 A DC
Turn Off welding power
source before connecting
foot control.
Foot Control
Remote 14, Remote 5, Or
Remote 6 Receptacle
Ref. 801736
Off
0 A DC
On
33 A DC
Combination Front Panel
And
Remote Control
Press pedal lightly to turn
weld output and gas flow
on. Press pedal further to
increase weld output.
Release pedal to turn off
weld output and gas flow.
Ref. 155790-H