Led Light; To Erase The Memory - Chamberlain RJO70 Manual

Programming
Program the Smart LED Light
Your garage door opener remote light has already been
programmed at the factory to operate with your opener.
Any additional or replacement remote lights will need to
be programmed.
PROGRAM A DOOR OPENER TO THE SMART LED
LIGHT
. Press the LEARN button on the light until the green
1
LED comes ON.
2. Press the LEARN button on the door opener. OR
on the Motion-Detecting Control Panel.
3. The code has been programmed when the remote
light blinks once.
PROGRAM A REMOTE CONTROL TO THE SMART LED
LIGHT
1. Press the LEARN button on the light until the green
LED comes ON.
2. Press the button on the remote control that you wish
to operate the light.
3. The code has been programmed when the remote
light blinks once.
To program the light with other accessories, refer to the
manual for your accessory.
ADD THE SMART LED LIGHT TO myQ
1. Press the LEARN button on the light until the green
LED comes ON.
2. Login to the myQ
®
TO ERASE ALL PROGRAMMING FROM THE SMART

LED LIGHT

1. Press and hold the LEARN button until the LED turns
off (6-10 seconds). All programming is now erased.
NOTE: The light must be programmed to the operator for
the Timer To Close or myQ
door unattended.

To Erase the Memory

ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES
1. Press and hold the LEARN button on garage door opener until
the learn LED goes out (approximately 6 seconds). All remote
control and keyless entry codes are now erased. Reprogram
any accessory you wish to use.
ERASE ALL DEVICES (Including myQ
1. Press and hold the LEARN button on garage door opener until
the learn LED goes out (approximately 6 seconds).
2. Immediately press and hold the LEARN button again until the
learn LED goes out. All codes are now erased. Reprogram any
accessory you wish to use.
ERASE THE WI-FI NETWORK FROM THE GARAGE DOOR
OPENER
1. Press and hold the black adjustment button on the garage
door opener until 3 beeps are heard (Approximately 6
seconds).
ACCOUNT
®
App and add the Smart LED Light.
app to be able to close the
®
enabled accessories)
®
Door Opener
LEARN Button
Motion-Detecting
Control Panel
Figure 1
Black Adjustment Button
LEARN
Button
33
LEARN Button