Advertisement
1-4-2. Coaxial Cable
Coaxial cables are connected to the following
boards and connectors. Be sure to observe the
disconnecting and connecting procedures below
to prevent wire disconnection or poor contact.
. CN-3261 board
. TR-139 board (HKSR-9001)
. VDA-69 board
. GENLOCK IN connector
. TC IN, TC OUT connectors
. TEST OUT connector
. HD SDI OUT A, HD SDI OUT B connectors
. AUX IN connector
. HD SDI MONI 1, 2 connectors
Disconnection
1. Remove the cable stopper (BNC). (Refer to
Section 1-3.)
2. Hook the claws of the cable stopper (BNC) to
the plug of the coaxial cable, and pull the
plug straight in the arrow direction to discon-
nect it.
n
Never pull the coaxial cable.
Connection
1. Hold the plug of the coaxial cable.
2. Push the plug perpendicularly to the connec-
tor while slightly turning the plug clockwise
and counterclockwise.
1-10 (E)
Claws
Arrow A view
Hold the plug to connect.
Connecting connector
Cable stopper
(BNC)
A
Plug
Coaxial cable
NG
Do not pull the cable.
HKSR-9003
Advertisement
