Table of Contents
Advertisement
Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.
The downdraft extractor must only be installed and operated in
combination with those SmartLine elements and hob units specified
by Miele.
Damage to the downdraft extractor can compromise your safety.
Check it for visible signs of damage. Do not use a damaged
downdraft extractor.
Reliable and safe operation of this downdraft extractor can only
be assured if it has been connected to the mains electricity supply.
The countertop extractor must not be connected to the inverter of
an autonomous power supply, e.g. a solar power system. When the
countertop extractor is switched on, power surges could result in a
safety switch-off. This could damage the electronic module.
The electrical safety of the downdraft extractor can only be guar-
anteed when continuity is complete between it and an effective
earthing system. It is most important that this basic safety require-
ment is present and tested regularly. If in doubt, the electrical install-
ation should be checked by a qualified electrician.
Before connecting the downdraft extractor to the mains supply,
ensure that the connection data on the data plate (voltage and fre-
quency) match the mains electricity supply. This data must corres-
pond in order to avoid the risk of damage to the downdraft extractor.
Compare this data before connecting the appliance to the mains.
Consult a qualified electrician if in any doubt.
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use these to
connect the downdraft extractor to the mains electricity supply.
Warning and Safety instructions
7
Advertisement
Table of Contents
