Table of Contents
Advertisement
Safety instructions for installation
Damage risk from incorrect installation.
Incorrect installation can cause damage to the SmartLine element.
The SmartLine element must only be installed by a qualified person.
Damage from falling objects.
Take care not to damage the SmartLine element when fitting wall units above it.
Fit the wall units before the SmartLine element.
After installation, the mains connection cable of the SmartLine
element must not come into contact with any moving kitchen com-
ponent (e.g. a drawer) or be subject to mechanical loads which could
damage it.
Combination with gas appliances
Only Miele CS 7xxx gas appliances may be installed next to the
downdraft extractor.
Observe carefully the safety clearances listed on the following
pages.
Exhaust ducting must be of non-inflammable material. Suitable
material is available from Miele specialist dealers or the Miele Spares
Dept.
The appliance must not be connected to a chimney or flue which
is in use. Neither should it be connected to ducting which ventilates
rooms with fireplaces.
If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
Installation
29
Advertisement
Table of Contents
