Figure 7-1 D-End And N-End End Shields With Grease Nipples - Siemens 1PL618 Series Operating Instructions Manual

K3N greases
WINTERSHALL Wiolub LFK 3
These greases have lithium soap as the thickening agent and mineral oil as the base oil.
They exceed the standard requirements of DIN 51825 in several important respects and are,
therefore, compatible with the specified regreasing intervals.
NOTICE
Never mix greases that have different thickening agents and base oils.
Initial lubrication
ESSO Unirex N grease is used for initial lubrication of the bearings (prior to delivery).
Lubricating using the regreasing device
Figure 7-1
①
②
1. Clean the grease nipples at the DE and NDE.
2. Press in the type and quantity of grease specified (see lubrication instruction plate).
A5E00215731A AD
Siemens AG Operating Instructions 2.02 1PL618
D-end and N-end end shields with grease nipples
Button head lubricating nipple to DIN 3404, size M10x1, drive end (DE)
Button head lubricating nipple to DIN 3404, size M10x1, non-drive end (NDE)
Maintenance
7.1 Maintenance
53