Table of Contents
Advertisement
Dismounting
18
BA 35
Schaeffler GreaseCheck
GreaseCheck should be dismounted as follows:
Ensure that the controller to which the electronic evaluation
system is connected is in a voltage-free state.
Disconnect the connection cable for the power supply from
the electronic evaluation system.
Disconnect the sensor cable from the electronic evaluation
system.
Loosen the internal clamping screw using an open-end wrench
SW13.
Avoid applying torsion forces to the sensor head.
This can lead to destruction of the sensor head.
Pull the sensor head carefully and without rotation out of
the internal clamping screw and close off the hole.
The grease sensor is dismounted.
Schaeffler Technologies
Advertisement
Table of Contents
