Time/Date - Suunto M9_en.p65 Instruction Manual

Deactivating alarms
To deactivate the alarm:
1. In the Set menu, Alarm is already the first menu item. Short press Enter to select it.
2. Scroll to the alarm you want to set off and short press Enter . The alarm information
is displayed and the On/Off indicator is displayed in reversed color.
3. Press either the up or down button to change the alarm status to off and short press
Enter . The alarm symbol disappears from the display.
Acknowledging alarms
When you hear the alarm, you can acknowledge it by pressing any of the Suunto M9
buttons.

3.2.5 Time/Date

The current time is visible on the second row of the Time mode's main display.
Dual time allows you to keep track of another time, for example, another time zone
when you are traveling. The dual time is displayed on the third row of the Time mode's
main display as a shortcut. To scroll to the dual time shortcut, press Stop/Cancel in the
Time mode's main display.
NOTE: The GPS checks and sets the correct time and date when activated if the
Sync function is on. You can change the UTC time offset in the Time/Date feature of
the Set menu or in the PC. You must always change the Dual time manually.
Off
On
18
4. Short press Enter . The alarm indicator changes to on and
the hour selection is activated.
5. Set the correct hour with the arrow buttons and short
press Enter . The minute selection is activated.
6. Set the correct minutes with the arrow buttons and short
press Enter . The alarm is now set.
GPS does not affect the time settings
GPS sets the time but does not update the time zone
(uses the UTC offset set in the device or the Suunto Sail
Manager)