Time And Date; Alarm Clock - Suunto SPARTAN ULTRA 2.0 User Manual

Suunto Spartan Ultra
6. Press the middle button to confirm and exit.
TIP: A watch face is also availalbe that shows sunrise and sunset times.
NOTE: Sunrise and sunset times and alarms require a GPS fix. The times are blank until
GPS data is available.

3.35. Time and date

You set time and date during the initial startup of your watch. After this, your watch uses GPS
time to correct any offset.
You can manually adjust time and date from the settings under GENERAL » Time/date where
you can also change time and date formats.
In addition to the main time, you can use dual time to follow the time at a different location, for
example, when you are traveling. Under General » Time/date, tap Dual time to set the time
zone by selecting a location.

3.35.1. Alarm clock

Your watch has an alarm clock that can sound once or repeat on specific days. Activate the
alarm from the settings under Alarm » Alarm clock.
Besides standard fixed alarms, you will also find an adaptive alarm type based on data for
sunrise and sunset. See 3.34. Sunrise and sunset alarms.
To set a fixed alarm time:
1. From the watch face, press the middle button to open the shortcuts menu and scroll to
Alarms.
2. First select how often you want the alarm to sound. The options are:
Once: alarm sounds once in the next 24 hours at the set time Weekdays: alarm sounds at
the same time Monday thru Friday Daily: alarm sounds at the same time every day of the
week
3. Set the hour and minutes and then exit the settings.
46