Stopwatch; Function Menu; Alarm - Suunto M9_en.p65 Instruction Manual

3.2.2 Stopwatch

Press Start/Data to start the timing. If you want to view a split time, press Start/Data
again. The time stops for three (3) seconds to show the split time and then returns to
showing the running time.
Press Stop/Cancel to stop the timing. After the timing has been stopped, you can scroll
the split times with Stop/Cancel .
To reset the timer, long press Stop/Cancel . If the stopwatch
has not been reset after stopping the timing, press Start/Data
to continue the timing.
Suunto M9 can display up to 29 split times.
NOTE: When you have used the stopwatch, you cannot select
other shortcuts before resetting the timer.
NOTE: The maximum time you can record with the stopwatch
is 10 hours.

3.2.3 Function Menu

For more information on the Function menu, see section 3.8 Function Menu.

3.2.4 Alarm

You can set altogether three independent alarms. When the
alarm is set, the alarm symbol appears on the display.
Activating alarms
To activate an alarm:
1. In the Set menu, Alarm is already the first menu item. Short
press Enter to select it. The alarm menu displays the status
of the alarms. When you open the menu for the first time,
the alarm indicators are set to off as default.
2. Scroll to the alarm you want to set and short press Enter .
The alarm information is displayed and the on/off indicator
is displayed as active (in reversed color). When you open
the alarm information for the first time, the time is 0:00.
3. Press either the up or down arrow to change the alarm
status to on .
17