3.5.4 Tracks
The Tracks function is used to view the information recorded
with the Tracking function.
Viewing the recorded tracks
To view the recorded tracks:
1. In the Set menu, scroll to Tracks and short press Enter . A
list of all the recorded tracks is displayed. The latest track is
displayed in reversed color.
2. Select a track with the arrow buttons and short press En-
ter . The following information is displayed:
• Start time and coordinates.
• Finish coordinates.
• Total duration of the track in hours and minutes, and the
length of the track in selected units.
• Maximum and average speed during the track.
• The number of recorded memory points. If the track has been recorded on a route
created earlier, the number of navigated waypoints is also displayed. See Creat-
ing a route on page 39.
3. Long press Enter to exit the Tracks function.
35