Related Manuals for Triton EPA001
Summary of Contents for Triton EPA001
- Page 1 Planer Attachment Kit EPA001 Operating and Safety Instructions www.tritontools.com...
-
Page 2: Table Of Contents
Thank you for purchasing this Triton product. These instructions contain information necessary for safe and effective operation of this product. Please read this manual to make sure you get the full benefit of its unique design. Keep this manual close to hand and ensure all users of this product have read and fully understand the instructions. -
Page 3: Parts List
PARTS LIST 1. Alignment Plate (1) 14. M6 Flange Nuts (6) 27. Coach Bolts - long (2) 28. Height Indicators (2) 2. Planer Chassis (1) 15. Handle Clamp (1) 3. M4 Screws (2) 16. Nut Carriers (2) 29. Scale Labels (1 pair) 4. -
Page 4: Safety
SAFETY INSTRUCTIONS WARNING. Read all instructions. Read all hard hat and hearing protection used in safety warnings and all instructions. Failure appropriate conditions will reduce personal to follow the warnings and instructions my injuries. result in electric shock, fire and/or serious injury. c. - Page 5 f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
-
Page 6: Assembly
ASSEMBLY FITTING THE PLANER TO THE CHASSIS Fit the Alignment Plate (1) to the lower side of the Planer Chassis (2) (flange outward) using the M4 Screws (3) and Flange Nuts (4). Tighten firmly with a Phillips screwdriver (Fig. 1). Fig. -
Page 7: Operating
Make adjustments to the handle bracket assembly Fig. 7 (repeat Fig’s 7 and 8) until you are satisfied with the alignment. Note: if your workpiece binds between the planer shoe and fence / jig during operation a 1-2mm offset of the rear shoe (as stated above) will eliminate this. -
Page 8: Rear Pivot
Fig. 17 Fig. 14 Insert the Front and Rear Pivot Brackets (21 and Fit Round Knobs (18) to the front and rear height 22) between the plastic and steel components of adjustment brackets and lock them tilted outward the table brackets and push until the steel tabs and slightly, for easy mounting of the planer chassis (Fig. -
Page 9: Angle Settings
screws and relocate the front and rear angle stops Fig. 24 up or down their slots until the blade is square, then re-tighten. Fit the Pressure Fingers (30) to the height brackets using the short Coach Bolts (17), Springs (31), Fig. -
Page 10: Self-Tapping
Push the Dust Hose (37) through the hole in the top Fig. 27 of the chassis and position it over your planers dust outlet (Fig. 32). Fig. 32 Fit the Tube Closer (33) into the rear chassis tube, as shown. Attach the Switch-Box (34) to the front brace by Bend the hose over and secure it using the Plastic screwing the Self-Tapping Screws (35) into the... -
Page 11: Guarantee
12 MONTHS from the (unless indicated otherwise) for information on future date of original purchase, Triton will repair, or releases. Details provided will not be made available to at its discretion replace, the faulty part free of any third party.
Need help?
Do you have a question about the EPA001 and is the answer not in the manual?
Questions and answers