ST-1700V Overview Hunter’s synthetic turf rotors are designed to cool, clean, and flush synthetic sports fields. The ST-1700V long-range synthetic turf rotor offers high-performance irrigation from the field perimeter while integrating Valve-in-Head (VIH) capabilities and a Total-Top-Service (TTS) design to simplify installation and maintenance. With the same heavy-duty internal gear drive as the proven ST-1600HSB rotor, the ST-1700V provides years of reliable operation.
Tools and Accessories 25° Nozzle #16 32 m 40 m Nozzle #18 34 m 42 m Nozzle #20 35 m 45 m Nozzle #22 35.5 m 47 m Nozzle #24 37 m 48 m Gear drive insertion/removal tool Valve insertion/removal tool Snap ring removal tool P/N 517600SP P/N 10000100SP...
Servicing and Maintenance A. Replacing the cover and rotor B. Replacing the propeller E. Accessing the valve-in-head Remove the center plug with a flat- Remove the eight screws on the Remove the rotor (see Step A). Remove blade screwdriver and unscrew the turbine housing (six large, two the boot.
Installation Guide FLANGE DETAIL Discharge port (OPEN) Discharge port (AUTO) Solenoid Water line to filter Water line to valve-in-head ➊ ➋ ➌ ACTUATOR ➍ ➎ Use “T” handle tool (P/N 319100SP) to operate solenoid actuator. INSTALLATION DETAIL Solenoid wiring 2" (50 mm) BSP Water line (Optional) isolation valve ➎...
Design Guide Rugby Field Hockey 70 m 55 m 25 m 30 m 25 m 100 m 90 m 30 m 25 m 30 m 25 m For safe and easy access to internal components, position the flange compartment away from the nozzle direction.