Electrical Installation - Scholl 22001/MM Instructions For Use Manual

GBA B 0020 2 E
4.2 E
LECTRICAL INSTALLATION
The appliance may only be installed by a qualified electrician whilst taking into
account the applicable regulations!
Connect this appliance to suitably earthed mains outlets only. Ensure that your
mains power supply conforms to the data stated on the nameplate of the appliance.
Failure to observe this warning may result in a fire hazard or electrical shock!
Before putting the appliance into service, observe the following:

Faulty equipment must not be taken into operation!
 Legal requirements and the connection conditions of your local power supply company must be fully
observed.
 Electrical safety functions must be carried out and checked for operability.
 Full protection against electric shock hazard must be ensured by the installation.
 Device with supply cable and plug:
If the plug is no longer accessible once the appliance is installed, an all-pole disconnecting device having
a contact spacing of at least 3 mm must be provided on the installation side to comply with applicable
safety requirements.
BA
Last revised 12-2017
Page 12 of 30 Dezember 22, 2017
Rev. 2