Installation And Electrical Installation; Installation - Scholl 21001/G Instructions For Use Manual

GBA B 0014 1 E
4 I
NSTALLATION AND ELECTRICAL INSTALLATION
4.1 I
NSTALLATION
Before the installation of the appliance, observe the following:
 Inspect the unit for any defect or damage sustained in transit.
 Check all screw connections for tightness.
 Familiarize yourself with the Instructions for Use and with the conditions for the safe operation of this
appliance.
 Clean the heat lamp before the first use according to chapter "Cleaning and care".
Practice:
 Mount the heat lamp at a suitable location.
 Check or adjust the tension of the coiled cord draft mechanism.
The traction can be adjusted at the draft mechanism:



BA
Last revised 04-2021
Unscrew the canopy and carefully push it down.
Justify the traction so that the heat lamp is easily adjustable in height but
not pulled down by its self-weight.
 For less traction, turn the red pointer to the left.
 For more traction, turn the red pointer to the right.
Carefully push the canopy upwards and screw it on again.
Page 12 of 24 April 7, 2021
Rev. 1