Maintenance Position - jcb 406 Quick Start Manual

Maintenance Position

Fig 23
Prepare the Machine for Maintenance
Prepare the Machine for Maintenance
the Machine for Maintenance
Machine Maintenance should be carried out by trained and qualified personnel.
the Machine for Maintenance
Ensure the machine is parked safe level ground and Isolated.
bly qualified
bly qualified
the machine
the machine
evel ground.
evel ground.
remove the
remove the
n you are not
n you are not
t take these
t take these
d.
d.
maintenance
maintenance
e procedures
e procedures
A). Unless a
A). Unless a
ntly, you must
ntly, you must
the Machine
the Machine
maintenance
maintenance
ce strut on the
ce strut on the
Machine Safe
Machine Safe
1.
Park machine In Either position A or B depending on task (position B requires safety strut).
2.
Isolate and Vent machine, removing Key and Isolator.
22 Please see operator manual for full details.
Routine Maintenance
Routine Maintenance
T021690-3
Fig 87.
T021690-3
Fig 87.
Service/Maintenance
Daily Checks (10h)
Condition of attachment / optional equipment
Grease as required all points on machine (ref Operator handbook)
Check machine condition latches bonnets,
Check in Cab switches and functions
Check engine bay
Check engine oil
Check hydraulic oil (sight glass)
Check coolant levels
Check fuel separator (Drain if necessary)
Check coolant pack for dust debris
Check windscreen & washers fluid level
Check operation of all services
Check operation of key items horn lights beacon
Check operation of hour meter,
Check tyres and pressures
Weekly Checks (50h)
Grease machine where necessary
Check tyres and tread
Check machine hose and pipework
Check ram condition
Checks
Visual
Physical
Visual / physical
Visual/physical
Visual
Physical
Visual
Visual
Visual / physical
Visual / physical
Visual / physical
Physical
Visual / audible
Visual
Visual / physical
Check
Physical or Visual
Visual
Visual
Visual
406, 407 & 409 23