Philips Respironics Wisp Youth Instructions For Use Manual page 5

Disassembly / Assembly
Reversible Fabric Frame
Choose the fabric that feels comfortable against the skin. That side will face inward toward the
cushion and headgear. The clear frame is not reversible.
Removing the Elbow and Tubing
1. Squeeze the Quick Release Tabs j.
2. Pull the elbow away from the cushion k.
Removing the Cushion
Push the cushion backwards through the frame l.
Removing the Headgear
1. Detach the headgear bottom clips from the frame or undo the bottom tabs and pull.
2. Undo the headgear top tabs and pull the straps through the frame.
Attaching the Cushion
1. Push the cushion into the frame towards the front and press into place l.
2. The bottom of the cushion will match the alignment cutouts of mask frame m.
Attaching the Elbow and Tubing
Push the elbow into the cushion until the Quick Release Tabs click into place k.
Attaching the Headgear
1. Hold the crown strap upward.
2. Make sure the wide strap marked with "Philips Respironics" is outward.
3. Slide the headgear tabs into the longer frame arm slots.
4. Connect the headgear clips to the frame or slide the tabs into the shorter frame arm slots if not
using the headgear clips.
Philips Respironics System One Resistance Control
This mask when combined with a Philips Respironics System One device, provides optimal
resistance compensation. This mask value is X1 and should be set by the provider.
Notes:
• Compare the mask to the device. See the device manual if the values do not match.
• System One is not compatible with masks that use a separate exhalation device.
5