Appendix C Troubleshooting; Troubleshooting Tables - Sunwave Tech. SRC-3000b User Manual

Appendix C Troubleshooting

Troubleshooting Tables

Problem
LCD does not show
anything when you
touch it.
The SRC-3000b
doesn't operate a
device.
You see "ERROR"
displayed during
operation.
Solution
1. Batteries may be dead. Replace
the batteries with three new AAA
alkaline batteries (page 4)
2. Check that the batteries are
properly installed.
1. Make sure that the desired device
key on the SRC-3000b LCD panel
has been selected.
2. Move closer to the device. The
maximum operating distance is
approximately 30 feet.
3. Ensure that you are aiming the
SRC-3000b directly at the device
and that there are no obstructions
between the SRC-3000b and the
device.
4. Ensure programming with the
learning function (page 15) or the
manufacturer codes has been
properly done.
5. Learn code the key (page 10).
1. The key that you pressed has not
been taught.
2. Teach the key using the learning
procedure (page 15).
36