Resetting The Src-3000B To Factory Defaults - Sunwave Tech. SRC-3000b User Manual

SRC-3000B User's Manual

3.5 Resetting the SRC-3000b to Factory Defaults

This function enables you to reset the SRC-3000b to the
factory default configuration.
NOTE:
All Macros and programmed keys will be deleted when
you reset the SRC-3000b to factory defaults.
1. Press and hold the
for 3 seconds to enter the
confirmation screen.
2. Press each number button
(2, 4, 6, 8) in any order until
they disappear and start to
use the function.
3. Press and
mode.
4. And then press
confirm your selection.
5. To avoid resetting the remote
accidentally, the
confirmation screen will
appear again.
6. If you really intend to reset
the SRC-3000b, please press
the four
again.
20
key
to select
key to
numbers(2,4,6,8)