20171012170126_32K98B000_eng_BOOK Page 81 Thursday, October 12 2017 17:09:26 JST
Removing & Installing Body Components
Rear Seat
Front prongs
Rear seat
Front stays
78
Rear Seat
u
#
Removal
Insert the ignition key into the seat lock.
1.
Turn it clockwise, then pull the rear seat
2.
up and back.
#
Installation
Insert the front prongs into the front stays
1.
on the frame.
Push and down on the rear of the rear
2.
seat until it locks in place.
Make sure that the seat is locked securely
in position by pulling it up lightly.
The seat locks automatically when closed.
Seat lock
Take care not to lock your key in the
Ignition
compartment under the rear seat.
key