Rear Seat - Honda CB 300R 2020 Owner's Manual

Rear Seat

Prongs Rear seat
Stays
Removing & Installing Body Components
#
1.
2.
Seat lock
#
1.
2.
Ignition key
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.
Removal
Insert the ignition key into the seat lock.
Turn it clockwise, then pull the rear seat
up and back.
Installation
Insert the prongs into the stays on the
frame.
Push and down on the rear of the rear
seat until it locks in place.
Make sure that the seat is locked
u
securely in position by pulling it up
lightly.
Rear Seat
u
81