Table of Contents
Advertisement
The Penny and Giles Pilot + control pod
Actuator mode function
This will be included on your
remote control pod if you have one
or more electric options fitted to
your chair. Refer to Fig. 20.
Menu select
To chose an electric option press
the mode button until the red lights
are visible on the wheelchair
diagram next to the joystick. Move
the joystick to the left or right to
indicate which function can be used
Legrest left
Seat tilt
Legrest right
When the desired function has
been chosen you can activate the
electric actuator system.
If you attempt to operate the
electric functions when driving, the
chair will automatically come to a
safe stop. We recommend you only
use the electric options whilst
stationary.
Up/down movement
Once the relevant electric option
has been chosen the required
movement is achieved by moving
the joystick forwards or backwards.
Programme port
This will enable an approved
service agent to reprogramme your
chair and also gain useful
information when tracing any faults
(Fig. 21).
Backrest recline
Both legrests
Fig. 20
Programme port
Fig. 21
17
Red
indicator
lights
Issue 4
Advertisement
Table of Contents
