Prepare Usb Webcam (Optional) - Fujitsu CELVIN NAS QE807 Operating Manual

Surveillance station

Prepare USB webcam (optional)

If you want to use a USB webcam instead of an IP camera, you will need a
camera with UVC (UVS Video Class) drivers.
Compatible webcams are listed at the following link:
• Linux UVC Webcam List:
The source mentioned above is for reference purposes only. Fujitsu cannot
provide a guarantee for complete compatibility.
► Connect the USB webcam to the NAS USB port. If the webcam is supported, it will be
listed in an entry in the System Log under System Settings - System Logs.
► Install the app QUSBCam so that the USB webcam can be used with the NAS.
► To do this, open the Recommended category in the App Centre.
► Search for QUSBCam.
► Click on Download.

QUSBCam is installed.
► To configure settings, click on Open.
► Log in with the user admin and the corresponding password (admin).
A maximum of two USB webcams can be used at the same time per NAS.
68
"http://www.ideasonboard.org/uvc"
Fujitsu