2.4.
Check and Upload the Firmware File
Before using the SX1280 Development Kit, make sure to have the latest firmware:
-
Go to the Utilities
-
Check the Firmware Version.
-
If it is not the latest version, download the firmware from the website
The firmware can then be uploaded to the SX1280 Development Kit.
To upload the firmware file:
-
Connect the SX1280 Development Kit as explained in
-
Allow your computer to display the kit as an extra device
-
Drag and drop the .bin file that has been provided to you or that you have downloaded from the Semtech
website.
-
The kit will initialize and eventually ask you to calibrate the screen, simply follow the on-screen instructions.
Wireless & Sensing Products
Development Kit User Guide
UG.DEV.SX1280-1.W.APP
section on page 14.
Rev.1.0
February 2017
www.semtech.com
Section 2
and save it to your PC.
6 of 15
Semtech