H3C S9500 Series Operation Manual page 3

Operation Manual – SNMP
H3C S9500 Series Routing Switches
1
5
A
Figure 1-1 Architecture of the MIB tree
The MIB (Management Information Base) is used to describe the hierarchical
architecture of the tree and it is the set defined by the standard variables of the
monitored network device. In the above figure, the managed object B can be uniquely
specified by a string of numbers {1.2.1.1}. The number string is the Object Identifier of
the managed object.
The current SNMP Agent of switch supports SNMP V1, V2C and V3. The MIBs
supported are listed in the following table.
Table 1-1 MIBs supported by the switch
MIB attribute
Public MIB
1
2
1
1
2
B
6
MIB content
MIB II based on TCP/IP network device
BRIDGE MIB
RIP MIB
RMON MIB
Ethernet MIB
OSPF MIB
IF MIB
2
1-2
Chapter 1 SNMP Configuration
References
RFC1213
RFC1493
RFC2675
RFC1724
RFC2819
RFC2665
RFC1253
RFC1573