Operating The Unit - ProMed 620 Instruction Leaflet

I
NFORMATION ON THE UNIT
• To ensure hygienic operation, the grinding heads must be
disinfected after use.
• The handpiece may only be disinfected using disinfectant
wipes.
• Information about suitable disinfectants and products can be
obtained from Promed.
For disinfection of instruments and grinding heads:
Promed Pure ID (Product No. 330810)
For disinfection of surfaces and devices:
Promed Pure FD (Product No. 330815)
For disinfection and cleaning of instruments and grinding
heads: Promed UC-50 (Product No. 330210)
• If needed, the power adapter (Product No. 290426) and the
handpiece (Product No. 200601) can be purchased from
Promed separately.
/
ACCESSORIES
A. Insert the power adapter (A) into the power socket and the
B. Insert the plug of the handpiece into the socket (E) on the right
C. Select a suitable grinding head. Insert the grinding head into
O
PERATING THE UNIT
Before you switch the unit on, you must set the rotating
speed (rotary knob (G)) to zero.
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
wall socket.
power adapter plug (B), on the back of the device, into the
provided power adapter socket (C).
side of the device.
the grinding head holder (D) at the front of the handpiece.
The mechanism locks automatically as soon as the grinding
head starts to rotate. Never use force to remove or insert
a grinding head! Grinding heads with a shaft diameter of
2.332 mm to 2.350 mm (0.091 to 0.093 inches) fit exactly into
the grinding head holder without you having to use excessive force.
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI