Operating The Unit - ProMed pedisenso duo Manual

I
NFORMATION ON THE UNIT
• Information about suitable disinfectants and products can be
obtained from Promed.
For disinfection of instruments and grinding heads:
Promed Pure ID (Product No. 330810)
For disinfection of surfaces and devices:
Promed Pure FD (Product No. 330815)
For disinfection and cleaning of instruments and grinding
heads: Promed UC-50 (Product No. 330210)
/ O
ACCESSORIES
A. Plug the power adapter (A) into a power outlet.
B. Select a collet chuck adapter (G) and screw it into the collet
C. Select a suitable grinding head. The yellow safety collet chuck
PERATING THE UNIT
Before you switch on the device, you must regulate the
speed (rotary knob (F)) to zero.
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
wall socket.
chuck adapter support (E).
adapter (G) is a safety collet chuck adapter with which
you may plug the abrasive at the front side of the adapter.
Once the abrasive body begins to rotate, the mechanism
locks automatically. With the white collet chuck adapter (G)
you must open the knurled screw by turning it, then plug the
abrasive and lock the chuck by tightening the knurled screw
again. Never use force to remove or insert a grinding head!
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI